Threaded axle with closed groove ball bearings for front cast hubs (Leleu) on your Puch moped / moped.
The threaded axle set consists of a 167 mm long wheel axle, two special ball bearings, two half-height and two high M12x1 nuts and various spacers.
The innovation set works with Leleu front wheel hubs, which are installed in cast rims.
Version 2.0: The already greased bearings now have an outer diameter of 29.02 mm, which ensures an improved fit and are fitted with a dust cover on both sides.
Mounting instructions: When mounting the ball bearings, it is important to note that the long spacer bush between the two ball bearings must be clamped to ensure that the two bearings press with the inner ring on the bush. If this is not observed, the ball bearings will inevitably jam.
Other axle parts can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | blue galvanized |
| Width | 34.5 mm, 6.6 mm, 11 mm, 2.7 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Ø outside | 29.02 mm |
| Height | 9.9 mm, 5.9 mm |
| Ø inside | 12 mm |
| Ø shaft | 11.95 mm |
| Shank length | 74.5 mm |
| Total length | 165 mm |
| Thread length | 50 mm, 40.5 mm |
| Ball bearing closed | Yes |
| Width across flats SW | 19 mm |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Area of application: Standard · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Height: 10 mm · Width across flats SW: 19 mm · Strength class: 8 · Thread depth: 10 mm
2,25 EUR
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats SW: 19 mm · Ø outside: 29.02 mm · Thread length: 40.5 mm · Thread length: 50 mm · Ø inside: 12 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Ball bearing closed: Yes
43,50 EUR
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 190 mm · Width across flats SW: 19 mm · Ø outside: 29 mm · Thread length: 29 mm · Thread length: 53 mm · Ø inside: 12 mm · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes
43,50 EUR
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 12 mm · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 9 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes
9,95 EUR
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
7,70 EUR
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm · Ø inside: 94 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm
22,20 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,10 EUR
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 12 mm · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Area of application: Standard · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø outside: 28 mm · Ball bearing closed: Yes
6,60 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
16,70 EUR
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 190 mm · Width across flats SW: 19 mm · Ø outside: 29 mm · Thread length: 29 mm · Thread length: 53 mm · Ø inside: 12 mm · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes
43,50 EUR
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
11,10 EUR
Collection only possible with online purchase and appointment.
