Montageanleitung
Hot 
The high-quality 38 mm original cylinder is now also available exclusively with «Vertex» pistons.
This cylinder fits various Puch mopeds / mopeds such as Maxi S / N, Puch X30 NS / NL, Puch X30 NG-2A.
Vertex pistons are world-renowned for their quality and design.
With this cylinder, you will reach your destination quickly and powerfully.
- The intake window has been moved downwards to achieve better timing.
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston have been milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the connecting rods have been adjusted
- ;The intake and exhaust have been machined to be largely flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a whopping 1.6 hp on the rear tire. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
The original «CH12» is of course also cast in.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Nominal diameter | 38 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 20 mm |
| Ø Inlet inside | 9 mm |
| Inlet window | 2 |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | Yes |
| Camouflaged | Yes |
| Area of application | Standard |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
38,00 EUR
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
8,55 EUR
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Ø piston pin (B): 12 mm · Tolerance group: A · Piston weight: 71 g
69,20 EUR
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
13,80 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
38,00 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
11,50 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,80 EUR
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Color: silver · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 22 mm · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: No · Strength class: 8.8 · Number of components: 24 pcs
9,15 EUR
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Component group Carburetor: Carburetor complete · Color: gray · Nominal diameter: 12 mm · Carburetor type: SRE · Width: 50 mm · Ø fuel hose connection: 6 mm · Height: 108 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Total length: 65 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
80,80 EUR
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Original · Hole spacing inlet: 38 mm · Ø inside: 12 mm · Number of fixing points: 2 pcs · Total length: 45.5 mm · Mounting type: Screws · Height flange center hole: 43 mm · Total height: 53 mm · Ø External connection: 20 mm · Camouflaged: No
40,30 EUR
swiing 12 mm carburetor set | Puch E50
Manufacturer: swiing · Area of application: Standard · Component group Carburetor: Carburetor complete · Nominal diameter: 12 mm · Carburetor type: SRE · Hole spacing inlet: 38 mm · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: No · Clamping screw torque (max.): 4 N/m
121,20 EUR
Collection only possible with online purchase and appointment.
