38 mm (50cc) racing cylinder kit suitable for your Puch Maxi S / N, Puch X30 Sport NS/NL, Puch X30 Sport NG-2A, as well as Puch Supermaxi moped, moped or small motorcycle.
If you want the complete kit, select this in the selection field to also receive the matching cylinder head.
In terms of appearance, this racing cylinder is indistinguishable from the original. The cast-in "CH12" and original-sized cooling fins ensure optimum protection from the racing authorities. Detailed instructions for correct installation and running-in are included.
This racing kit should preferably be used with a 22 mm exhaust, i.e. a 2-bend or 22 mm manifold, so that the exhaust gases can also be transported away and no heat build-up occurs.
&Revised version: The sealing surfaces of the inlet and outlet have been enlarged so that a large 28 mm flame tube can also be fitted without any problems (Fig. 7). There is also no longer any protrusion from the piston and the cylinder has been adapted accordingly. Last but not least, the inlet gasket has also been reworked.
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 44 x 44 · Inlet window: 23.4 x 14.7 · Manufacturer: swiing® revival parts · Material: Cast aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
Details
Nominal diameter | 38 mm |
Manufacturer | swiing® revival parts |
Material | Cast aluminum |
Area of application | Tuning |
Surface | sandblasted |
Displacement | 50 ccm |
Number of fixing points | 4 pcs |
Outlet type | straight |
Camouflaged | Yes |
Alternative version of the Puch spare part no. | 349.7.10.105.0 |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Area of application: Standard · Material: Aluminum · Width: 125 mm · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Height: 55 mm
36,80 EUR
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
8,30 EUR
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A
67,00 EUR
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
13,30 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Area of application: Standard · Material: Aluminum · Width: 125 mm · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Height: 55 mm
36,80 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
3,15 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
swiing® revival set stud bolts M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Total length: 106 mm · Drive: External hexagon · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch spare part no.: 360.1.10.034.1
8,30 EUR
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Width: 50 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
89,30 EUR
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 46 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Hole spacing inlet: 38 mm
39,00 EUR