Insert with M10x1.5 mm thread to close the decompressor on your moped, moped and small motorcycle.
Thread: M 10 x 1.5
Thread length: 10 mm
Slot width: 10 mm
Outer diameter: 13.5 mm
Total length: 18 mm
Material: Steel, galvanized
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Drive | External hexagon |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M10x1.5 (standard thread) |
| Screw head | Hexagon |
| Width across flats SW | 10 mm |
| Thread length | 10 mm |
| Total length | 18 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, 2AL / 2BL |
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
10,20 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs · Ø outside: 5 mm
2,30 EUR
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Piston weight: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM number: 0286 377 010 · Sachs OEM number: 0286 378 005
58,00 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM number: 0232 017 006
28,90 EUR
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Ø inside: 8.5 mm · Ø outside: 19.3 mm · Total length: 19 mm · Manufacturer: swiing® revival parts · Waistband height: 1.5 mm · Color: black · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Material: Rubber · Material: Steel · Surface: raw · Area of application: Standard · Pony OEM number: A1940 · Sachs OEM number: 0260 101 000
8,00 EUR
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM number: 0640 016 101 · Sachs OEM number: 0640 016 102
2,10 EUR
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
116,10 EUR
Not in stock
Collection only possible with online purchase and appointment.
