Clamping screw M5 x 20 for various Bing carburettors for clamping the intake manifold on your moped, moped and small motorcycle.
Thread: M5
Length: 20 mm
Drive: External hexagon / slotted
Slot width: 8 mm
Material: Steel, galvanized.
Further carburetor spare parts can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
| Area of application | Original |
| Color | silver |
| Thread type | M5x0.8 (standard thread) |
| Total length | 24.1 mm |
| Drive | External hexagon, Slot |
| Screw head | Hexagon |
| Width across flats SW | 8 mm |
| Thread length | 8.5 mm |
| Shank | Yes |
| Ø shaft | 3.8 mm |
| Shank length | 11.5 mm |
| Pony spare part no. | A4593 |
| Sachs spare part no. | 0962 066 000 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
Moped fans like you also bought:
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Carburetor type: SRE · Total length: 23.5 mm · Width: 16 mm · Height: 12.5 mm · Choke control: Hand choke · Alternative version of the Pony Spare part no.: A4599 · Alternative version of Sachs spare part no.: 0962 089 000
5,00 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
3,15 EUR
BING Sealing ring fuel inlet Bing SRE, 85, SRC, SRF, SLH, SRA
Ø inside: 8.3 mm · Manufacturer: BING · Area of application: Standard · Material: Fiber · Surface: raw · Place of use: Carburetor · Ø outside: 11.7 mm · Thickness: 1.1 mm · Pony spare part no.: A4553 · Sachs spare part no.: 0962 013 000
1,55 EUR
BING Jetstock 2.17 Bing SRE & SRA
Manufacturer: BING · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Drive: External hexagon · Ø nozzle holder: 2.17 mm · Nozzle thread: M3.5 · Nozzle block: 2.17 · Pony spare part no.: A4586 · Sachs spare part no.: 0962 051 011
17,80 EUR
BING nozzle needle Bing SRE, 85 & 17 / 18 (two grooves)
Manufacturer: BING · Carburetor type: SRE · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Total length: 36 mm · Carburetor type: 85 · Ø outside: 2 mm · Number of grooves (needle designation): 2 pcs · Number of notches (needle clip): 4 pcs · Pony spare part no.: A4594 · Sachs spare part no.: 0962 068 000
9,95 EUR
Collection only possible with online purchase and appointment.
