Securing plates made of stainless steel for securing sprockets with 5-hole mount and 72° pitch on your moped / moped with Grimeca hub.
The pre-stressed plates are used to secure the bolts on the sprocket. During assembly, two plates must be placed on top of each other. The locking tab on the lower plate must be cut off or knocked straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Pitch circle: 115 mm
Number of fixing points: 5 pcs.
Material: Chrome steel (stainless steel)
Matching sprockets and screw sets can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (stainless steel) |
| Number of lobes | 6 pcs |
| Thickness | 1 mm |
| Ø bolt circle | 115 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,10 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,50 EUR
2.450,00 EUR/l
ESJOT sprocket 51 teeth Grimeca (5-hole) galvanized
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 51 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm
44,60 EUR
ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 115 mm
44,60 EUR
ESJOT sprocket 41 teeth Grimeca (5-hole)
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 41 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 115 mm
44,60 EUR
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Area of application: Standard · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
2,80 EUR
GPO fork lock | Puch
Ø Pin: 8 mm · Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Width: 17 mm · Ø outside: 12 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm
11,10 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Sachs spare part no.: P0521 · Puch spare part no.: 349.1.30.015.1
2,80 EUR
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Thread length: 24 mm · Width across flats Screw: 8 mm · Total length: 34 mm · Width across flats nut: 8 mm
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
Magura set screw M5x34 mm
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 2.55 mm · Ø Receptacle: 7.05 mm · Thread type: M5x0.8 (standard thread) · Slotted: No · Thread length: 24 mm · Width across flats Screw: 8 mm · Total length: 34 mm · Width across flats nut: 8 mm
2,80 EUR
Handlebar stem 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 710 mm · Ø outside: 22 mm · Height: 350 mm · Length handlebar ends: 140 mm · Mounting type: Front boom mounting · Crossbar: Yes · Clamping diameter: 25 mm
38,60 EUR
Collection only possible with online purchase and appointment.
