Brake caliper suitable for Puch Maxi S rear wheels.
The galvanized brake plate is in no way inferior to the original SGDG / LELEU brake anchor plates in terms of workmanship and functionality.
The brake lever and the brake cam are bolted and can be easily removed if necessary.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Ø axle | 12 mm |
Material | Steel |
Surface | blue galvanized |
Ø shaft | 10 mm |
Ø outside | 91 mm |
Ø External brake pads | 80 mm |
Ø bore | 12.2 mm |
Ø screw holder | 6.5 mm |
Wide cam holder | 12 mm |
Brake lever length (lever length) | 55 mm |
Cranking (offset) | 8 mm |
Total length | 187 mm |
Suitable for the following models
Puch |
Accessories & related products
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Total length: 125 mm · Ø wire: 2.4 mm · Length spring hook: 50 mm · Leg length: 45 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: blue galvanized
5,45 EUR
Moped fans like you also bought:
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Total length: 125 mm · Ø wire: 2.4 mm · Length spring hook: 50 mm · Leg length: 45 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: blue galvanized
5,45 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Ø inside: 94 mm · Material: Steel · Color: black · Surface: powder-coated · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Thickness: 4.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm
22,20 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Total length: 185 mm
16,70 EUR
swiing® revival screws set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Shank: No · Thread length: 22 mm · Width across flats SW: 10 mm · Number of components: 24 pcs
14,40 EUR
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Ø outside: 118 mm · Manufacturer: GPO · Ø axle: 12 mm · Material: Cast aluminum · Ø drum: 80 mm · Color: silver · Width: 54.5 mm · Thread type: M8x1.25 (standard thread) · Ø Receptacle: 92 mm · Wheel size [inch]: 17 " · Thread length: 14 mm · Number of fixing points: 5 pcs · Ø bolt circle: 106 mm
64,70 EUR
Cast wheel hub | Puch Maxi, X30 NG-2AH
Ø inside: 27.9 mm · Ø outside: 114.7 mm · Ø axle: 12 mm · Material: Cast aluminum · Area of application: Tuning · Ø drum: 80 mm · Surface: blank · Surface: raw · Color: silver · Thread type: FG34.8 (1.37" 24G) · Total length: 105 mm · Thread length: 12 mm · Number of fixing points: 12 pcs · Ø mounting hole: 6.1 mm · Ø bolt circle: 105 mm
100,50 EUR