This gas-nitrided washer is used for the brake anchor plate on your Sachs moped / moped.
The gas-nitrided washer has a small turned shoulder on the inside diameter to enclose the snap ring.
This 7 mm thick shim ring is used for newer rear wheel hubs in which the round part of the brake anchor plate consists of a rolled sheet metal and not a thick metal plate.
In addition, the spider of these wheel hubs was bolted on as standard and not firmly welded as on the older versions.
Ø inner: 10.7 mm
Ø outer: 19 mm
Thickness: 7 mm
Further accessories for your wheel hub, such as the 3.5 mm thick bearing ring, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: F1147
Details
| Manufacturer | swiing® revival parts |
| Surface | gas nitrided |
| Ø inside | 10.7 mm |
| Thickness | 7 mm |
| Ø outside | 19 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Area of application: Standard
8,85 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
26,70 EUR
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Surface: blank · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Height: 10 mm · Drive: External hexagon · Width across flats SW: 17 mm
7,70 EUR
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 14 mm · Ø outside: 27 mm · Ball bearing closed: No
7,70 EUR
Moped fans like you also bought:
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Area of application: Standard
8,85 EUR
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Surface: blank · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Height: 10 mm · Drive: External hexagon · Width across flats SW: 17 mm
7,70 EUR
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 14 mm · Ø outside: 27 mm · Ball bearing closed: No
7,70 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Ø shaft: 10.5 mm · Thread length: 34 mm · Thread length: 45 mm · Shank length: 95.6 mm
33,40 EUR
Collection only possible with online purchase and appointment.
