Thrust washer

swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50

Manufacturer: swiing® revival parts · Material: Steel · Area of application: Standard · Surface: hardened & ground · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Ø outside: 22 mm · Ø outside: 24 mm · Ø inside: 15 mm · Ø inside: 17 mm

MBR thrust washer 15/22/0.2 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: MBR · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 0.2 mm

Thrust washer 1 mm pedal axle | Sachs 50/2 Caravelle

Ø inside: 18 mm · Manufacturer: Sachs · Material: Steel · Surface: hardened & ground · Ø outside: 25 mm · Thickness: 1 mm

swiing® revival thrust washer 15/22/1.7 clutch | Puch E50, Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1.7 mm · Ø inside: 15 mm · Ø outside: 22 mm · Puch spare part no.: 050.1213

swiing® revival thrust washer 15/22/1.5 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 1.5 mm

Thrust washer 0.5 mm pedal axle | Sachs 50/2 Caravelle

Ø inside: 18 mm · Manufacturer: Sachs · Material: Steel · Surface: hardened & ground · Ø outside: 25 mm · Thickness: 0.5 mm

Thrust washer 0.3 mm pedal axle | Sachs 50/2 Caravelle

Ø inside: 18 mm · Manufacturer: Sachs · Material: Steel · Surface: hardened & ground · Ø outside: 25 mm · Thickness: 0.3 mm

MBR thrust washer 15/22/0.3 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: MBR · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 0.3 mm

swiing® revival thrust washer 10.7/19/1.8 coaster brake

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1.8 mm · Ø outside: 19 mm · Ø inside: 10.7 mm

swiing® revival thrust washer 15/22/0.6 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 0.6 mm

swiing® revival thrust washer 15/22/0.8 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 0.8 mm

swiing® revival thrust washer 15/22/1.1 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 21.9 mm · Thickness: 1.1 mm

swiing® revival thrust washer 15/22/1.0 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 1 mm

swiing® revival thrust washer 15/22/1.3 clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 1.3 mm

swiing® revival thrust washer 10/18/0.5 gearbox | Piaggio Ciao, SI, Bravo, Boxer

Ø inside: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 0.5 mm

swiing® revival thrust washer 17/24/1.7 clutch | Maxi E50

Ø inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1.7 mm

MBR thrust washer 17/24/0.3 clutch | Puch E50

Ø inside: 17 mm · Manufacturer: MBR · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 0.3 mm

Thrust washer 16.5/31.3/1 main shaft | Sachs 50/2, 503 (A1570)

Ø inside: 16.5 mm · Material: Steel · Surface: hardened & ground · Ø outside: 31.3 mm · Thickness: 1 mm · Pony spare part no.: A1570 · Sachs spare part no.: 0244 078 000

swiing® revival thrust washer 10/18/0.3 gearbox | Piaggio Ciao, SI, Bravo, Boxer

Ø inside: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 0.3 mm

swiing® revival thrust washer 17/24/1.5 Clutch | Maxi E50

Ø inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1.5 mm

swiing® revival thrust washer 15/26/1 clutch | Puch Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1 mm

swiing® revival thrust washer 16.6/31.2/1 pinion shaft | Sachs 502, 50/2, 50/3, 50/4, 503 (A1570)

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1 mm · Ø outside: 31.2 mm · Ø inside: 16.6 mm · Pony spare part no.: A1570 · Sachs spare part no.: 0244 078 000

Thrust washer 15/22/1.2 clutch | Puch E50, Z50

Ø inside: 15 mm · Material: Steel · Surface: hardened & ground · Ø outside: 21.9 mm · Thickness: 1.2 mm

swiing® revival thrust washer 16/26/1 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1690)

Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1 mm · Pony spare part no.: A1690 · Sachs spare part no.: 0246 015 002

Brake cam disk anchor plate cast rim | Piaggio Ciao, SI, Bravo

Ø inside: 6.6 mm · Ø inside: 10 mm · Material: Steel · Surface: blue galvanized · Ø outside: 19.7 mm · Thickness: 1.55 mm · Piaggio spare part no.: 184468

swiing® revival thrust washer 15/22/1.95 mm clutch | Puch E50, Z50

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 1.95 mm

swiing® revival thrust washer 17/24/1.1 clutch | Maxi E50

Ø inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1.1 mm

swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)

Ø inside: 13.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 27.8 mm · Thickness: 1 mm · Pony spare part no.: A1547 · Pony spare part no.: A1548 · Sachs spare part no.: 0244 039 000 · Sachs spare part no.: 3510 004 004

swiing® revival thrust washer 17/24/1.3 clutch | Maxí E50

Ø inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1.3 mm

swiing® revival thrust washer 16/26/0.3 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1688)

Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.3 mm · Pony spare part no.: A1688 · Sachs spare part no.: 0246 015 000

swiing® revival thrust washer 12.5/18/2.2 gearbox | Puch Z50

Ø inside: 12.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 2.25 mm

Shim 13/19/1.0

Ø inside: 13.2 mm · Material: Steel · Nominal diameter: 13 mm · Ø outside: 18.8 mm · Thickness: 1 mm

swiing® revival thrust washer 12.5/18/2.5 gearbox | Puch Z50

Ø inside: 12.5 mm · Ø outside: 18 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 2.5 mm

Thrust washer bearing ring small NOS | Puch Z50

Ø inside: 16 mm · Manufacturer: Puch · Material: Steel · Surface: hardened & ground · Ø outside: 27.8 mm · Thickness: 1 mm

swiing® revival thrust washer 12.5/18/2 gearbox | Puch Z50

Ø inside: 12.5 mm · Ø outside: 18 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 2 mm

swiing® revival thrust washer 13.5/31.2/1 pinion shaft | Sachs 502, 50/2 (A1571)

Ø inside: 13.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 31.2 mm · Thickness: 1 mm · Pony spare part no.: A1571 · Sachs spare part no.: 0244 078 005

swiing® revival thrust washer 16/26/0.15 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1691)

Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.15 mm · Pony spare part no.: A1691 · Sachs spare part no.: 0246 015 003

swiing® revival thrust washer 17/24/1 clutch | Puch ZA50

Ø inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1 mm

swiing® revival thrust washer 14/24/1.0 crankshaft | Sachs 503 ABL (A5649)

Ø inside: 14.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1 mm · Pony spare part no.: A1561 · Pony spare part no.: A5649

swiing® revival thrust washer 12.5/18/1.6 gearbox | Puch Z50

Ø inside: 12.5 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 1.6 mm

Thrust washer 17/26/1.1 Gearbox

Ø inside: 17 mm · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 1.1 mm

swiing® revival shim set VG4 & VG5 Vario transmission | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Surface: blank / oiled · Piaggio spare part no.: 131512 · Piaggio spare part no.: 131513 · Piaggio spare part no.: 131514 · Piaggio spare part no.: 175747 · Piaggio spare part no.: 175751

swiing® revival thrust washer 5/15/1 clutch | Puch E50

Ø inside: 5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 15 mm · Thickness: 1 mm

swiing® revival thrust washer 25.4/34/0.2 crankshaft | Sachs 504, 535 (A1678)

Ø inside: 25.4 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 34 mm · Thickness: 0.2 mm

swiing® revival disk 11.8/22/3 Clutch 1st gear | Sachs 503 AB, ABL (A5661)

Ø inside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 3 mm · Pony spare part no.: A5661 · Sachs spare part no.: 0244 181 100

swiing® revival thrust washer 16/26/0.5 clutch | Sachs 502 AL, AML / 503 AAL, AC, ADV (A1689)

Ø inside: 16.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 26 mm · Thickness: 0.5 mm · Pony spare part no.: A1689 · Sachs spare part no.: 0246 015 001

swiing® revival thrust washer 23/34/0.4 gearbox | Piaggio Ciao, SI, Bravo, Boxer

Ø inside: 23 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 34 mm · Thickness: 0.4 mm

swiing® revival bearing washer bearing ring 1.5 mm large new version | Z50

Ø inside: 20.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 31.7 mm · Thickness: 1.5 mm

swiing® revival thrust washer 14.3/20/0.5 crankshaft | Sachs 503 ABL (A5649)

Ø inside: 14.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 20 mm · Thickness: 0.5 mm · Pony spare part no.: A5649 · Sachs spare part no.: 0644 002 121

swiing® revival thrust washer 14/24/0.2 gearbox | Piaggio Ciao, SI, Bravo, Boxer

Ø inside: 14 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 0.2 mm

Disc 12.2/22/2.5 Clutch | Sachs 503 ABL (A5623)

Ø inside: 12.2 mm · Manufacturer: Sachs · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Thickness: 2.5 mm · Pony spare part no.: A5623 · Sachs spare part no.: 0244 181 000

swiing® revival bearing washer 1 mm bearing ring large old version | Puch Z50

Ø inside: 20.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 31.7 mm · Thickness: 1 mm

swiing® revival thrust washer 10/24/1 release bearing engine | Beta 521, 512 (A8055)

Ø inside: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 1 mm

swiing® revival thrust washer 12.5/18/1.4 gearbox | Puch Z50

Ø inside: 12.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 1.4 mm

swiing® revival thrust washer 12.5/18/3 gearbox | Puch Z50

Ø inside: 12.5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 3 mm · Puch spare part no.: 350.1.13.082.1

swiing® revival thrust washer 19/38/2.5 gear wheel 1st gear | Sachs 503 AB, ABL (A1198)

Ø inside: 19.1 mm · Tolerance: DIN 988 (-0.03 mm) · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø outside: 38 mm · Thickness: 2.5 mm · Pony spare part no.: A1198 · Sachs spare part no.: 0244 201 100

swiing® revival thrust washer 14/24/0.3 crankshaft | Sachs 503 ABL (A5649)

Ø inside: 14.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 24 mm · Thickness: 0.3 mm

Disk 19.1/38/1.5 | Sachs 503 AB, AC, ADV (A4487)

Ø inside: 19.1 mm · Manufacturer: Sachs · Material: Steel · Surface: hardened & ground · Ø outside: 38 mm · Thickness: 1.5 mm

Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50

Ø inside: 12.5 mm · Manufacturer: Puch · Material: Steel · Surface: hardened & ground · Ø outside: 18 mm · Thickness: 2.75 mm

swiing® revival thrust washer 15/28/0.2 gearbox | Piaggio Ciao, SI, Bravo, Boxer

Ø inside: 15 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø outside: 28 mm · Thickness: 0.2 mm