Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
| Manufacturer | Xtreme |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 44 mm |
| Ø spars | 28 mm |
| Color | black |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 260 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,10 EUR
2.510,00 EUR/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 260 mm · Number of fixing points: 2 pcs
57,10 EUR
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Width across flats SW: 7 mm · Total length: 15 mm · Thread length: 7 mm · Thread type: M6x1 (standard thread)
2,85 EUR
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Area of application: Standard · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Thread size: M6 · Lens material: Plastic · Mounting type: Screws · Ø outside: 130 mm · Speedometer recording: None · Depth: 80 mm · Height: 147 mm · Switch included: No · Battery operated: No · Width: 134 mm · Number of fixing points: 2 pcs
28,50 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
11,30 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread)
14,80 EUR
Collection only possible with online purchase and appointment.
