Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting if lateral forces occur.
Length (mount – mount): 340 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
Details
Manufacturer | YSS |
Material | Steel |
Surface | varnished, chrome-plated |
Damping type | Hydraulic (oil) |
Ø outside | 52 mm |
Adjustable | Yes |
Color | black, Chrome |
Ø Fastening inside | 10 mm, 12 mm |
Ø spars | 32 mm |
Mounting type | Nuts & bolts |
Number of fixing points | 2 pcs |
Hole spacing | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
25,10 EUR
2.510,00 EUR/l
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Ø spars: 24 mm · Color: black · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 340 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
57,10 EUR
Moped fans like you also bought:
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.4 mm · Total length: 125 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Area of application: Original · Area of application: Standard
5,60 EUR
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Width across flats SW: 7 mm · Thread length: 7 mm · Area of application: Standard
2,85 EUR
Magura set screw M6x34 mm lock nut SW8
Slotted: No · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Receptacle: 7.05 mm · Total length: 34 mm · Thread length: 24 mm
2,85 EUR
NGK CR4 Racing ignition cable & plug High End red
Ø cable: 7 mm · Manufacturer: NGK · Material: Silicone · Color: red · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Resistance: 5000 Ω · Component group Carburetor: Carburetor complete · Component group Carburetor: Spraying · Cable length: 500 mm
37,70 EUR