Special gear wheel for the transmission of mopeds, mopeds and small motorcycles with Sachs 503 and 50/2 (502) engines.
The gear wheel is designed and recalculated for second gear. Due to the increased number of teeth of 24 (instead of 22 / 23 teeth), the second gear is 9% or 4.5% shorter.
The «short first gear» that occurs with optimized timing and the resulting torque gap between 1st and 2nd gear is thus closed. This is particularly suitable for use in racing or with increased operating weight.
For perfect gear ratios, both gears (first and second gear with 24 teeth) can be replaced. This leads to a better and increased shift speed in second gear and ideally it can be shifted directly into resonance speed.
Note: if you install new transmission parts, you should check the transmission after approx.
If you install new transmission parts, you should carry out an oil change after approx. 100 km to remove any new, light abrasion from the gearbox.
You will find the corresponding gear wheel in addition to other suitable parts in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
Details
| Ø outside | 49.3 mm |
| Manufacturer | ADDY |
| Thickness | 8 mm |
| Material | Steel |
| Surface | burnished |
| Toothing type | straight toothed |
| Number of teeth | 24 pcs |
| Ø inside | 13 mm |
| Total length | 72.7 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - 2AL / 2BL |
Accessories & related products
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,50 EUR
25,56 EUR/l
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 210 mm · Width: 130 mm · Thickness: 0.4 mm · Number of fixing points: 5 pcs · Pony OEM number: A1827 · Sachs OEM number: 0250 087 100
6,85 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Resistance: 1000 Ω · Suppressed: Yes · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
10,20 EUR
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 15 mm · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Shank length: 6.9 mm · Ø shaft: 6.1 mm · Drive: Knurled screw · Color: silver
3,95 EUR
GPO flywheel 6V / 17W clockwise (Version 2.0) | Puch E50
Manufacturer: GPO · Material: Plastic · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: right · Weight: 900 g · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 7 mm · Height: 36.5 mm
102,20 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Width: 8 mm · Ø outside: 35 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Area of application: High End · Area of application: Standard · Material: Steel · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony OEM number: A2531 · Sachs OEM number: 0286 079 105
58,00 EUR
Collection only possible with online purchase and appointment.
