High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Mounting type | Nuts |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 95 mm · Total length: 830 mm · Ø Internal connection: 23 mm · Ø Silencer: 60 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
213,70 EUR
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Internal connection: 24 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
340,80 EUR
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Total length: 900 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
329,30 EUR
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Manufacturer: AKOA · Material: Steel · Total length: 940 mm · Surface: blank · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Mounting type: Nuts · Number of fixing points: 3 pcs
392,80 EUR
Not in stock
Moped fans like you also bought:
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Thickness: 3 mm · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
8,55 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,50 EUR
swiing® ingenious 45 mm cylinder kit 70 ccm CH12 camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.6/21.2 x 14.7 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: Yes · Area of application: Tuning
115,50 EUR
Collection only possible with online purchase and appointment.
