Unique racing exhaust with offset silencer suitable for various Puch mopeds.
The exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds.
The special feature of this Homoet model is that the center section is slightly longer, resulting in more power.
Ideal for cylinder kits between 38 and 42 mm. The tuning exhaust can only be fitted to cylinders with a straight outlet.
HOMOET DEMPER exhaust system made by hand in the Netherlands.
Details
| Manufacturer | HOMOET |
| Material | Steel |
| Mounting type | Welded lug |
| Number of fixing points | 1 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
8,60 EUR
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Total length: 160 mm · Hole spacing: 137.5 mm
173,80 EUR
swiing® revival side protection screw set black | Puch Maxi S
Total length: 47 mm · Total length: 60 mm · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
15,00 EUR
GPO pedal cranks pair chrome | Puch
Manufacturer: GPO · Material: Steel · Thread type: FG14.3 (9/16" 20G) · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
86,80 EUR
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Manufacturer: Road Master · Tire width [inch]: 2.25 " · Width [inch]: 2 1/4 · Color: black · Wheel size [inch]: 17 " · Old designation: 21 x 2.25 · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4.P.R. · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
34,70 EUR
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Total length: 32 mm · Ø External head: 14 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Manufacturer: GPO · Ø shaft: 9.8 mm · Number of components: 3 pcs · Material: Chrome steel (stainless steel) · Area of application: Standard · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Shank: Yes · Thread length: 13 mm · Shank length: 9.5 mm
15,00 EUR
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: galvanized (blue) · Material addition: Steel · Number of springs: 3 pcs · Number of jaws: 3 pcs · Thickness: 19 mm · Recording type: Cone mounting · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
220,10 EUR
Not in stock
Collection only possible with online purchase and appointment.
