Racing cylinder of the Athena brand for Sachs 504 (with adaptations), 505 & 508 engines, which were installed on Hercules mopeds / mopeds, among others.
Thanks to the large intake, overflow and exhaust, this tuning cylinder provides a significant increase in performance.
The intake manifold with diaphragm system for Dell'Orto SHA or PHBG carburetors and exhaust flange is included in the scope of delivery.
Technical data cylinder:
- Connection diameter intake manifold: 19 mm and 24 mm
- Ø inside exhaust flange: 20 mm
- Ø connection exhaust flange: 25.7 mm
- Distance stud bolt exhaust flange: 50 mm
- Ø thread exhaust flange: M8
- Ø cylinder neck: 51.6 mm
- stroke: 44 mm
- bore: 48.0 mm
- thread for decompressor: M10 x 1.5 mm
Attention: For the Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust cylinder base and gasket as shown in Figure 6.
- The cylinder base must be turned off so that the compression is adjusted again due to the shorter stroke, we recommend setting a crushing edge of 0.8 - 1.0 mm.
- For models with an external clutch lever, the intake must be extended, otherwise the carburetor may come into contact with the clutch lever.
Since experience has shown that the steel diaphragm plates supplied can break, we recommend replacing them with carbonite diaphragm plates. You can find these and other suitable parts in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Manufacturer | Athena |
| Material | Aluminum |
| Area of application | Tuning |
| Surface | sandblasted |
| Crankshaft stroke | 44 mm |
| Ø piston pin (B) | 12 mm |
| Nominal diameter | 48 mm |
| Ø cylinder neck | 51.8 mm |
| Ø Outlet outside | 26 mm |
| Camouflaged | No |
| Ø Inlet inside | 14.7 mm, 17.8 mm |
| Inlet window | 31.9 x 36.2 |
| Hole pattern [mm] | 56/60 x 56 |
| Ø outlet inside | 19.4 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole spacing outlet | 50 mm |
| Decompressor | M10x1.5 |
| Outlet type | straight, clamped |
| Thread outlet | M8x1.25 (standard thread) |
| Hole spacing inlet | 32.5 mm |
Suitable for the following models
| Sachs | 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A |
| Hercules | Prima - 2, 3, 4, 5, Optima |
Accessories & related products
Athena piston 48 mm #B | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.12 mm · Curvature (D): 1.94 mm · Total piston height (E): 59 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: B · Piston weight: 123 g
79,90 EUR
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
79,90 EUR
Not in stock
NGK B9ES spark plug long thread
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: B9ES · Candle thread type: long · Area of application: Original · Area of application: Standard · Spark plug socket: M4 · Suppressed: No · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread)
7,55 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,50 EUR
25,56 EUR/l
Petrol filter large 6 / 8 mm orange
Material: Paper · Material: Plastic · Color: transparent · Color: white · Color: yellow · Filter type: Filter paper · demountable: No · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 8 mm · Ø outside: 38 mm · Ø inside: 4.2 mm · Total length: 49 mm · Total length: 108 mm
5,70 EUR
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 21 mm · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning
7,55 EUR
Collection only possible with online purchase and appointment.
