Buzzetti brake bleeder bottle incl. return valve to prevent the ingress of air when bleeding the brake system.
This practical tool belongs in every workshop where work is carried out on mopeds, mopeds or motorcycles with hydraulic disc brakes.
The mounted metal bracket with the hook is practical for hanging the bleed bottle on the vehicle and also provides a place to store the hose when you are not bleeding.
This practical tool belongs in every workshop where work is carried out on mopeds, mopeds or motorcycles with hydraulic disc brakes.
Hose length: 820 mm
Recommended use:
- Put the hose on the bleed screw of the brake calliper .
- Öff the cover of the brake compensation reservoir (we recommend wrapping a rag around the reservoir to absorb any brake fluid that may leak out).
- Open the bleed screw and pump all the brake fluid out of the system by pressing the brake constantly.
- Pour the new brake fluid into the reservoir and apply the brake again until the fluid flows cleanly into the bottle. In the meantime, please keep topping up the brake fluid in the expansion tank so that no air gets into the system.
- Close the bleed screw and remove the hose from the bleeder bottle.
- Fill the expansion tank up to the mark and close it.
Brake fluids and conversion kits for disc brakes can be found in the accessories section.
Quality product from the Italian manufacturer Buzzetti.
Details
| Manufacturer | Buzzetti |
| Material | Plastic, Steel |
| Color | transparent |
| Mass display | Milliliter |
| Height | 270 mm, 170 mm |
| Area of application | Workshop accessories |
| Capacity | 500 ml |
| Diameter | 75 mm |
Accessories & related products
Moped fans like you also bought:
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 17 " · Tire height [%]: 100 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR6 car valve
17,30 EUR
Clip chain guard/ footboard | Pony GTX Cilo 521
Manufacturer: Pony · Material: Spring steel · Surface: galvanized (blue) · Color: silver · Width: 16.1 mm · Total length: 23.9 mm · Height: 6.7 mm · Thread type: Sheet metal screw · Number of fixing points: 1 pcs · Ø mounting hole: 3 mm · Ø mounting hole: 3.9 mm
1,65 EUR
Collection only possible with online purchase and appointment.
