Lightened clutch basket with 21 teeth suitable for Puch Maxi mopeds / mopeds with 1-speed E50 engine.
The clutch basket is designed for the often installed spur gear with 106 teeth.
With pressed-in brass bushing. There are four small holes on the sliding bush for additional lubrication.
Note that the play of the clutch basket must be correctly balanced. Figure 3 shows the corresponding dimensions.
You will find suitable thrust washers in the accessories, which are mounted in front of and behind the clutch basket.
Details
| Material | Steel |
| Toothing type | helical toothed |
| Ø inside | 14.5 mm |
| Number of teeth | 21 pcs |
| Recording type | Interlocking |
| Height | 49.3 mm |
| Ø Receptacle | 30.5 mm |
| Ø outside | 99.5 mm |
| Area of application | Tuning |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Plain bearing 15/17/21.75 Clutch basket "Racing" | Puch E50
Nominal diameter inside: 15 mm · Manufacturer: Made in Switzerland · Material: special bearing bronze · Ø outside: 17 mm · Ø inside: 15 mm · Area of application: Racing · Area of application: Tuning · Total height: 21.75 mm · Puch OEM number: 349.1.12.011.1 · Puch OEM number: 349.2.12.011.1
28,90 EUR
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
58,00 EUR
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.8 mm · Color: blue · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs · Area of application: Tuning
20,80 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Number of components: 7 pcs · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
11,50 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
11,50 EUR
25,56 EUR/l
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø inside: 106 mm · Color: sand-colored · Ø outside: 116 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
3,35 EUR
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Area of application: Standard
45,00 EUR
Collection only possible with online purchase and appointment.
