Reproduction of the original Puch E50 gearbox, consisting of a clutch basket and a spur gear.
Fits E50 & E50A engines of all Puch Maxi and Supermaxi P1 mopeds / mopeds.
The original clutch and starter clutch can be used with this basket.
Normal gear ratio of 19:96 teeth with helical teeth.
The helically toothed gears run more smoothly than straight-toothed gears.
Clutch basket:
- Welded press fit, no spinning possible, even under higher loads
- Special sliding bush is already press-fitted
Spur gear:
- Spur gear made from cast material
- Slightly more solid design than original
Note: Clutch basket and spur gear should always be used together. There may be a slight "singing" when the clutch basket is used with the original spur gear.
High-quality alternatives can be found in the accessories section.
Original Puch spare part number: 344.1.13.350.0
Details
| Material | Steel |
| Area of application | Standard |
| Recording type | Interlocking |
| Toothing type | helical toothed |
| Number of teeth | 19 pcs, 96 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
11,50 EUR
25,56 EUR/l
MBR clutch basket 19 teeth Racing angled | Puch E50
Ø outside: 100.5 mm · Ø Receptacle: 31.1 mm · Manufacturer: MBR · Material: Steel · Area of application: Tuning · Recording type: Interlocking · Color: silver · Ø inside: 15 mm · Ø inside: 17 mm · Toothing type: helical toothed · Number of teeth: 19 pcs · Height: 49 mm
214,90 EUR
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
58,00 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
11,50 EUR
25,56 EUR/l
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 0.35 mm · Puch OEM number: 349.1.10.349.1
2,80 EUR
GPO front mudguard strut 17" chrome
Total length: 305 mm · Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Surface: chrome-plated · Wheel size [inch]: 17 " · Color: Chrome · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm
17,30 EUR
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Camouflaged: Yes · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 66 mm · Nozzle block: 2.17 · Width: 50 mm · Nozzle size: 62 · Height: 95 mm · Clamping screw torque (max.): 4 N/m
92,90 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Ø inside: 15 mm · Total length: 46 mm · Total height: 53 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Mounting type: Screws · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm
40,60 EUR
Collection only possible with online purchase and appointment.
