Juicy performance from Good Parts Only

The sun-ripened ‘Pomodoro’ tuning cylinder for Sachs 503 engines is the alternative to comparable racing kits and impresses with its freshness in the lower rev range as well as its powerful bite in the form of acceleration and pulling power. It also impresses with a juicy finish in the upper rev range.

- 16 %

Set

Sachs

34470

GPO Ø 43 mm "Pomodoro" cylinder kit | Sachs 503

Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 22 mm · Thread inlet: M6x1 (standard thread) · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37

279,30 EUR

335,20 EUR

Set

Sachs

33373

GPO Ø 41 mm "Pomodoro" cylinder kit | Sachs 503

Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 22 mm · Thread inlet: M5x0.8 (standard thread) · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37

223,40 EUR

Sachs

32603

GPO piston 43 mm | Sachs 50/2, 50/3, 50/4

Nominal diameter: 43 mm · Manufacturer: GPO · Ø outside piston (A): 42.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm

50,20 EUR

Sachs

26879

GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4

Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm

44,60 EUR

Sachs

34469

GPO gasket set 41 mm "Pomodoro" | Sachs 503

Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 1 mm · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 41 mm · Number of components: 3 pcs · Hole spacing inlet: 0 - 32 mm

16,70 EUR

Sachs

34474

GPO gasket set 43 mm "Pomodoro" | Sachs 503

Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1 mm · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 43 mm · Number of components: 3 pcs · Hole spacing inlet: 0 - 32 mm

16,70 EUR

Sachs

35057

GPO piston rings set 43 x 1.5 mm (IS) | Sachs 50/2, 50/3, 50/4

Height: 1.5 mm · Nominal diameter: 43 mm · Manufacturer: GPO · Area of application: Tuning · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Thick piston ring: 1.7 mm

14,40 EUR

Sachs

32396

GPO inlet seal BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2

Manufacturer: GPO · Material: Oiled paper · Hole spacing inlet: 32 mm · Thickness: 1 mm · Ø inside: 19 mm · Place of use: Admission · Ø screw holder: 6.5 mm

8,85 EUR

More collections

Grippy tyres by Vee Rubber

From everyday tyres to studded and full slick. Founded in 1977, the Thai tyre manufacturer Vee Rubber offers a wide range of stylish tyre designs for every surface with an excellent price-performance ratio.

23_10-mklt-collection-swiing-evo-zündung-01msc

swiing® ingenious EVO ignition

Thanks to a flywheel weighted as standard, it has a smoother idle than conventional racing ignitions. Thanks to its fine balancing, it keeps vibrations low even at high speeds. The stator was designed to withstand high heat loads so that no failures occur even at full power. Care has also been taken to ensure that the ignition is always easy to install and adjust. This makes it probably the most reliable racing ignition on the market.

Custom 17’ cast rims for Grimeca hubs

23_10-mklt-collection-swiing-17-vergaser-01msc

swiing® ingenious 17 mm SRF carburettor

The new swiing 17 mm carburettor gives you a real boost with its original look. Perfectly camouflaged on the outside, top performance for your moped on the inside. Available with matching intake manifold for Puch E50 and Z50.

Mofakultwear helmets

Helmets from Mofakultwear don't just look good, they should be good too. That's why they are handmade in Italy. Our models are all ECE-R22.05 approved and are absolutely roadworthy. So that you always have a good feeling when cruising.