Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Plastic |
| Color | black |
| Ø inside | 30 mm |
| Ø outside | 34 mm |
| Total length | 20 mm |
Suitable for the following models
| Puch |
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Temperature resistance (min.): -30 - 150 °C · Manufacturer: Motorex · Area of application: Chemistry · Area of application: Fat · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous
105,00 EUR
Not in stock
23,33 EUR/kg
Moped fans like you also bought:
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Nominal diameter: 43 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 46 mm · Number of fixing points: 3 pcs · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
159,70 EUR
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Nominal diameter: 43 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø cylinder neck: 46 mm · Number of fixing points: 3 pcs · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
159,70 EUR
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Color: black · Bulb holder: P26s · Housing material: Plastic · Lens material: Plastic · Tension: 6 V · Tension: 12 V · Ø External connection: 6.3 mm · Switch included: Yes · Battery operated: No · Depth: 147 mm · Mounting type: Screws · Speedometer recording: 48 mm · Width: 125 mm · Height: 90 mm · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio spare part no.: 584240
42,40 EUR
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Drive: Outer edge · Total length: 32 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Area of application: Standard · Thread type: MF10x1 (fine pitch thread) · Number of components: 3 pcs · Ø shaft: 9.8 mm · Ø External head: 14 mm · Shank: Yes · Shank length: 9.5 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Thread length: 13 mm
14,40 EUR
BGS bottom bracket / bottom hole puller with slide hammer
Total length: 285 mm · Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 10 pcs
145,20 EUR
Handlebar fork plate 24 cm Puch Maxi chrome
Width: 625 mm · Height: 240 mm · Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 75 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: No · Mounting type: Fork plate
53,40 EUR
Collection only possible with online purchase and appointment.
