Idle run for various mopeds such as Puch, Sachs, Hercules, Pony, Piaggio, Solex, Zündapp, Tomos and others.
High-quality pedal sprocket made of hardened steel with 1/2 x 1/8" sprocket pitch. An FG34.8 thread (inner diameter 34.0 mm) is used to mount the pedal sprocket.
Chain pitch: 1/2 x 1/8"
Number of teeth: 16 / 18 / 20 / 23 (at choice)
Thread: FG34.8
More freehub sprockets and the matching mounting tool can be found under accessories.
German quality product from the manufacturer ESJOT in original equipment quality.
Details
| Chain pitch | 1/2" x 1/8" |
| Manufacturer | ESJOT |
| Material | Steel |
| Surface | Hardened |
| Thickness | 15 mm |
| Number of teeth | 16 pcs, 18 pcs, 20 pcs, 23 pcs |
| Thread type | FG34.8 (1.37" 24G) |
| Color | silver |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio |
Accessories & related products
Motorex Chain Lube chain spray 56 ml (for on the road)
Manufacturer: Motorex · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 56 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
12,20 EUR
217,86 EUR/l
Autosol chain spray 400 ml
Manufacturer: Autosol · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 400 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Temperature resistance (min.): -10 - 140 °C
14,40 EUR
Not in stock
36,00 EUR/l
ESJOT freewheel 23 teeth (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Chain pitch: 1/2" x 1/8" · Thread type: FG34.8 (1.37" 24G) · Thickness: 15 mm
16,70 EUR
Moped fans like you also bought:
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: blue galvanized · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
11,10 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Ø inside: 94 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
22,20 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Ø outside: 11.8 mm · Ø shaft: 11.9 mm · Width across flats SW: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Total length: 185 mm
16,70 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,10 EUR
Cast wheel hub | Puch Maxi, X30 NG-2AH
Total length: 105 mm · Ø axle: 12 mm · Number of fixing points: 12 pcs · Material: Cast aluminum · Ø drum: 80 mm · Surface: blank · Surface: raw · Area of application: Tuning · Thread type: FG34.8 (1.37" 24G) · Color: silver · Ø inside: 27.9 mm · Ø bolt circle: 105 mm · Ø outside: 114.7 mm · Thread length: 12 mm · Ø mounting hole: 6.1 mm
100,50 EUR
Collection only possible with online purchase and appointment.
