Tuning exhaust with 28 mm flame pipe suitable for Puch Maxi S / N, as well as Puch X30 Sport NS / NL.
The M7 screw at the end of the flame pipe should always be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
Attention: The sound of the replica exhausts can be slightly louder than the original, so you can wrap wool around the muffler to help. You can find this in the accessories below.
A quality product made in Portugal.
Details
Manufacturer | Made in Portugal |
Material | Steel |
Surface | chrome-plated |
Color | Chrome |
Ø outside | 58 mm |
Total length | 920 mm |
Ø Flame tube outside | 28 mm |
Number of fixing points | 4 pcs |
Exhaust type | Flute |
Mounting type | Welded lug, Stud bolts & nuts |
Flame tube attachment | Flange |
Suitable for the following models
Puch | E50 |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
0,80 EUR
Moped fans like you also bought:
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Carburetor type: SRE · Mounting type: Plug connection clamped · Width: 50 mm · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
72,50 EUR
15 mm intake manifold | Puch E50
Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 47 mm · Total height: 54 mm · Height flange center hole: 43 mm · Mounting type: Screws · Hole spacing inlet: 38 mm
13,40 EUR
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Area of application: Tuning · Camouflaged: Yes · Material: Cast aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 38 mm
94,90 EUR
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Total length: 113 mm · Camouflaged: No · Area of application: Tuning · Material: Metal · Material: Rubber · Filter type: Grille · Ø Internal connection: 20 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø outside: 61 mm · Color: Chrome · Color: black · Mounting type: Bride · Mounting type: Plug connection clamped
14,50 EUR
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Total length: 6 mm · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
17,80 EUR
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Ø cylinder: 44 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
48,00 EUR