Racing air filter suitable for 12 - 15 mm Bing SRE carburettors on your moped, moped or small motorcycle
.The air filter is clamped to the carburettor using the pre-assembled clamps
You can find suitable carburetors in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Total length | 113 mm |
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Metal, Rubber |
| Color | Chrome, black |
| Filter type | Grille |
| Length rubber part | 63.5 mm |
| Length of filter section | 49 mm |
| Ø outside | 61 mm |
| Area of application | Tuning |
| Ø Internal connection | 20 mm |
| Mounting type | Plug connection clamped, Bride |
Suitable for the following models
| Universal | |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC |
Accessories & related products
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Camouflaged: No · Nominal diameter: 15 mm · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 82 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Area of application: Standard · Area of application: Tuning
156,30 EUR
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Width: 50 mm · Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Carburetor type: SRE · Total length: 66 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Area of application: Tuning · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
93,40 EUR
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Color: gray · Carburetor type: SRE · Total length: 65 mm · Width: 50 mm · Nominal diameter: 12 mm · Height: 108 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
81,70 EUR
swiing® revival carburetor 12 mm original | Sachs 503
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Nominal diameter: 12 mm · Width: 55 mm · Carburetor type: SRE · Height: 112 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 65 mm · Area of application: Standard · Pony OEM number: A2442 · Sachs OEM no.: 0281 115 105
93,40 EUR
- 30 %
Hot
12 mm carburetor "Black Edition" original | Puch
Material: Aluminum · Surface: coated · Nominal diameter: 12 mm · Color: black · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Area of application: Standard
75,90 EUR
109,80 EUR
Moped fans like you also bought:
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
75,50 EUR
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Ø inside: 14.5 mm · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 54 mm · Total length: 47 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs
14,00 EUR
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Nominal diameter: 44 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes
98,70 EUR
Exhaust 28 mm | Puch
Ø outside: 58 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 920 mm · Flame tube attachment: Flange · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Flute
57,90 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Material: Steel · Area of application: Standard · Surface: galvanized (blue) · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,25 EUR
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
18,60 EUR
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Total length: 135 mm · Height: 55 mm · Ø cylinder: 44 mm · Area of application: Tuning · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
50,20 EUR
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Width: 50 mm · Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Carburetor type: SRE · Total length: 66 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Area of application: Tuning · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
93,40 EUR
Collection only possible with online purchase and appointment.
