Transparent float chamber suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor. This float chamber was installed on Puch Maxi, X30, Velux, Sachs and Zündapp Belmondo mopeds, among others.
The transparent material means you always have the fuel mixture in view and can immediately see the float level and whether deposits are forming in the chamber.
The float cover can be permanently fitted. When tightening, make sure that it is only tightened lightly by hand, as with the original cap.
Ø outer: 44 mm
Total height: 31 mm
Slot width (SW): 19 mm
You can find the original float cap and various revision products for your carburettor in the accessories section.
Details
Material | Plastic |
Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
Height | 31 mm |
Ø outside | 44 mm |
Number of fixing points | 1 pcs |
Width across flats SW | 19 mm |
Suitable for the following models
Puch | |
Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A |
Zündapp Belmondo | |
Zündapp | 247 Motor |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Material: Aluminum · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 32.5 mm · Ø outside: 43.5 mm · Width across flats SW: 14 mm · Piaggio spare part no.: A4587 · Sachs spare part no.: 0962 056 000
21,10 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Ø inside: 41 mm · Ø outside: 45 mm · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
3,15 EUR
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Camouflaged: No · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 82 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Standard · Area of application: Tuning
149,40 EUR
BING revision set float Original Bing SRE, SRC, SRF, SRA
Ø outside: 36.5 mm · Manufacturer: BING · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Pony spare part no.: A5634 · Sachs spare part no.: 0281 125 002
33,40 EUR
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Width: 3.3 mm · Total length: 12 mm · Manufacturer: swiing® revival parts · Ø outside: 2.6 mm · Ø outside: 4 mm · Material: Aluminum · Material: Rubber · Color: black · Surface: blank · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Alternative version of the Pony Spare part no.: A4595A · Alternative version of Sachs spare part no.: Bing 47-032
7,70 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Ø inside: 41 mm · Ø outside: 45 mm · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
3,15 EUR
BING rubber grommet Ø 8 mm carburetor pipe bend
Total length: 29 mm · Manufacturer: BING · Ø inside: 8 mm · Ø outside: 12 mm · Material: Rubber · Area of application: Standard · Color: black · Clamping diameter: 4 mm · Alternative version of the Pony Spare part no.: A1930 · Pony spare part no.: A1952 · Alternative version of Sachs spare part no.: 0260 024 001 · Sachs spare part no.: 0260 125 000
4,35 EUR
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Color: Chrome · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
39,00 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Ø outside: 6 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Width across flats nut: 8 mm
7,70 EUR
BING revision set float Original Bing SRE, SRC, SRF, SRA
Ø outside: 36.5 mm · Manufacturer: BING · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Pony spare part no.: A5634 · Sachs spare part no.: 0281 125 002
33,40 EUR