Idle run for various mopeds, including Puch Maxi, Sachs, Hercules, Pony, Piaggio, Solex, Zündapp, Tomos, etc.
Pedal sprocket with 1/2 x 1/8" gear pitch.
The Tretwerk sprocket has 16 teeth.
A thread FG34.8 (= inner diameter 33.6 mm) is used to mount the Tretwerk sprocket.
You can find the higher-quality alternative to this inexpensive reproduction product in the accessories section.
Details
Material | Steel |
Number of teeth | 16 pcs |
Chain pitch | 1/2" x 1/8" |
Thread type | FG34.8 (1.37" 24G) |
Suitable for the following models
Universal | |
Puch | |
Sachs | |
Pony / Cilo (Beta 521 & 512) |
Accessories & related products
Motorex Chain Lube chain spray 56 ml (for on the road)
Manufacturer: Motorex · Oil type: fully synthetic · Contents [ml]: 56 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Road use
12,20 EUR
217,86 EUR/l
Autosol chain spray 400 ml
Temperature resistance (min.): -10 - 140 °C · Manufacturer: Autosol · Contents [ml]: 400 ml · Area of application: Chemistry · Area of application: Road use · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable
14,40 EUR
Not in stock
36,00 EUR/l
ESJOT freewheel 16 teeth (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Thickness: 15 mm · Color: silver · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Chain pitch: 1/2" x 1/8" · Thread type: FG34.8 (1.37" 24G)
16,70 EUR
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
2,70 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
2,25 EUR
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
11,10 EUR
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Material: Steel · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 1 pcs · Alternative version of the Pony Spare part no.: A4606 · BOSCH spare part no.: 1 217 013 025 · Alternative version of Sachs spare part no.: 0983 106 000 · BERU spare part no.: 0 340 100 710
16,70 EUR
CIF wheel axle set M11x1 x 200 mm galvanized
Manufacturer: CIF · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.3 mm · Total length: 200 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Thread length: 92 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Shank length: 14.5 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
16,70 EUR
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
8,30 EUR