Complete CDI ignition for left-turning engines. Ignition is with light and has an operating voltage of 6V and 12 amps.
Connection of the supplied 6/12V voltage regulator:
- Pin 1: Yellow, current-carrying cable from the light coil
- Pin 2: Yellow cable to light
- Pin 3: Ground
The blue cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Color: gray · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
Details
| Manufacturer | GPO |
| Ø Internal flywheel | 90 mm |
| Tension | 6 V |
| Area of application | Standard, Performance |
| Direction of rotation | left |
| Ø mounting plate | 90 mm |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
116,10 EUR
Not in stock
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
246,10 EUR
Moped fans like you also bought:
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Total length: 23 mm · Diameter: 4.9 mm · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Pony OEM number: A3700 · Sachs OEM number: 0640 016 101 · Sachs OEM number: 0640 016 102
2,10 EUR
Gasket set with oil seals Diaphragm version | Sachs 50/2
Number of components: 16 pcs · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Area of application: Standard · Hole pattern [mm]: 60 x 40 · Pony OEM number: A2548 · Sachs OEM number: 0286 125 021
46,40 EUR
GPO ignition plate 6 / 12V CDI ignition
Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Color: gray · Tension: 6 V · Tension: 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Performance · Area of application: Standard
104,50 EUR
swiing® revival pinion shaft | Sachs 50/2 manual (A1291)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Number of teeth: 4 pcs · Toothing type: straight toothed · Recording type: Ø15 x SW12 · Ø inside: 13 mm · Ø outside: 15.4 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 102.6 mm · Pony OEM number: A1291 · Sachs OEM number: 0237 014 002
90,00 EUR
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Piston weight: 86 g
46,40 EUR
Collection only possible with online purchase and appointment.
