Racing clutch from HK Tuning suitable for Puch Maxi mopeds/mopeds with E50 engine.
The tuning clutch is equipped with a reinforcing ring, reinforced springs and Kevlar linings.
From the factory, this racing clutch is set to an engagement speed of 7200 rpm and balanced so that all the linings engage simultaneously.
In contrast to the previously available HK clutch with aluminum arms, this version uses steel arms. This results in more contact pressure and makes this racing clutch a must-have product for heavily tuned engines.
Thanks to the built-in starter clutch lining, your moped / moped can still be started without a pull starter.
Ø outer: 93.3 mm
Thickness: 21 mm
Number of jaws: 3 pieces
Material: steel
You can continue to use your original clutch basket or one of the accessories.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Manufacturer | HK Clutches |
| Material addition | Aramid (known as Kevlar®) |
| Recording type | Cone mounting |
| Ø outside | 93.3 mm |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Area of application | Racing, High End, Cross |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Ø outside: 93 mm · Thickness: 20.3 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: Racing
359,30 EUR
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: galvanized (blue) · Material addition: Steel · Recording type: Cone mounting · Ø outside: 92.5 mm · Thickness: 19 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
220,10 EUR
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (stainless steel) · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Ø outside: 93 mm · Thickness: 21.2 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
520,50 EUR
MBR clutch basket 19 teeth Racing angled | Puch E50
Manufacturer: MBR · Material: Steel · Color: silver · Toothing type: helical toothed · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Ø outside: 100.5 mm · Number of teeth: 19 pcs · Height: 49 mm · Area of application: Tuning · Ø Receptacle: 31.1 mm
214,40 EUR
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Toothing type: straight toothed · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Ø outside: 99.5 mm · Number of teeth: 18 pcs · Height: 49 mm · Area of application: Tuning · Ø Receptacle: 31 mm
214,40 EUR
Clutch basket 21 teeth needle bearing lightened | Puch E50
Material: Steel · Color: graphite colors · Toothing type: helical toothed · Ø inside: 15 mm · Recording type: Interlocking · Ø outside: 99.6 mm · Number of teeth: 21 pcs · Height: 49.5 mm · Area of application: Tuning · Ø Receptacle: 30.5 mm
144,80 EUR
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.8 mm · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Area of application: Tuning · Ø outside: 8.3 mm · Number of components: 3 pcs
20,80 EUR
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Total length: 170 mm · Ø outside: 130 mm · Width: 150 mm · Height: 80 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
173,80 EUR
Polini CP 21 mm carburetor (hand choke)
Nominal diameter: 21 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Total length: 73.5 mm · Carburetor type: CP · Width: 75 mm · Height: 135 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 72 · Ø Inside entrance: 21 mm · Ø Internal connection: 24 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Output inside: 21 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Size of secondary nozzle: 42
173,80 EUR
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Color: red · Surface: varnished · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm
86,70 EUR
Not in stock
Collection only possible with online purchase and appointment.
