Completely reworked 12V HPI ignition with built-in 60W light coil, for use with breaker ignition, suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Advantages of the HPI ignition:
- always a constant, strong spark
- better acceleration due to small and light rotor (364 g)
- lightweight aluminum flywheel (200 g)
- better throttle response
- no more misfires
- ;
- one adjustment and never again
- little to no wear
- less temperature sensitivity
The ignition can be optionally supplemented with the programmable HPI CDI box for two ignition curves and the HPI switch. This allows you to switch between two pre-installed ignition curves.
Only for experienced mechanics:
This high-end ignition does not fit in housings designed for electronic ignition. Before installing the new earthing, the two mounting points of the impulse coil must be removed by 3 mm (see Figure 3) to create a flat surface with the other support points for the base plate. After this, it is no longer possible to mount the coil on a contact ignition.
Further adjustment work must also be expected, including on the fan wheel.
If the light coil is used, a 12V voltage regulator must be used.
With two pieces of approx. 80 mm long M6 screws, you can use the clutch puller for Puch (item 10086) to remove the flywheel again.
Further parts such as the programmable HPI CDI box or the matching HPI switch can be found in the accessories.
Branded product from the manufacturer HPI – Horse Power Ignition.
Details
| Manufacturer | HPI |
| Light coil voltage | 12 V |
| Direction of rotation | right |
| Performance | 60 W |
| Ø mounting plate | 90 mm |
| Ø Internal flywheel | 61.5 mm |
| Ø cable | 7 mm |
| Number of fixing points | 4 pcs |
| Ø Flywheel outside | 140 mm |
| Mounting type | Screws |
| Area of application | Tuning |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
10,20 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws
40,60 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Area of application: Chemistry · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 95 mm · Ø inside: 39 mm · Thickness: 12.5 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 7 pcs · Weight: 300 g · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm
58,00 EUR
HPI racing ignition 12V with light elect. Housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Light coil voltage: 12 V · Mounting type: Screws · Direction of rotation: right · Performance: 60 W · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Area of application: Racing · Area of application: Tuning · Ø Flywheel outside: 140 mm
406,70 EUR
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
11,50 EUR
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws
40,60 EUR
Collection only possible with online purchase and appointment.
