Complete 12V HPI ignition with built-in 60W light coil, for housings with electronic ignition, suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Advantages of the HPI ignition:
- always a constant, strong spark
- better acceleration due to small and light rotor (364 g)
- Lightweight aluminum flywheel (200 g)
- better throttle response
- no more false ignitions
- adjust once and never again
- Little to no wear and tear
- less sensitivity to temperature
The ignition can optionally be supplemented with the programmable HPI CDI box for two ignition curves and the HPI switch. This allows you to switch between two pre-installed ignition curves.
Details
| Manufacturer | HPI |
| Area of application | Tuning, Racing |
| Light coil voltage | 12 V |
| Ø Internal flywheel | 61.5 mm |
| Ø cable | 7 mm |
| Performance | 60 W |
| Direction of rotation | right |
| Mounting type | Screws |
| Ø Flywheel outside | 140 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
10,20 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Surface: galvanized (blue) · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm · Total length: 50 mm · Width: 27 mm · Height: 15 mm
40,60 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
HPI racing ignition 12V with light breaker housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 140 mm · Mounting type: Screws · Number of fixing points: 4 pcs
406,70 EUR
swiing® ingenious 280 g additional weight HPI Inox
Ø inside: 39 mm · Ø outside: 95 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Number of fixing points: 7 pcs · Thickness: 12.5 mm · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Weight: 300 g
58,00 EUR
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,50 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM number: 0950 128 000
3,25 EUR
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Material: Sealing paper · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Thickness: 0.35 mm · Total length: 200 mm · Width: 130 mm · Color: sand-colored · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM number: 0250 150 000
6,30 EUR
GPO blade gauge set 0.05 - 1.00 mm 20 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Number of components: 20 pcs · Material: Steel · Area of application: Measuring tool · Thickness: 0.05 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.35 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 0.55 mm · Thickness: 0.65 mm · Thickness: 0.7 mm · Thickness: 0.75 mm · Thickness: 0.8 mm · Thickness: 0.85 mm · Thickness: 0.9 mm · Thickness: 0.95 mm · Thickness: 1 mm
17,30 EUR
Collection only possible with online purchase and appointment.
