Moderate Casual 
Center stay (stay) suitable for Puch Maxi S / P1, Puch X30 NS / NL / NG mopeds and mopeds.
The chrome-plated center stay requires minor adjustments in the area of the stop plates.
Total height (A): 20 cm
Spring nipple height (B): 12 cm
Width of base (C): 4.5 cm
Width of mount (D): 6.7 cm
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The high-quality alternative, as well as corresponding add-on parts such as strut springs, bearing shells, etc. can be found in the accessories section.
Details
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Wide receptacle (C) | 67 mm |
| Spring nipple distance - center pivot axis (E) | 120 mm |
| Wide upright foot (F) | 45 mm |
| Total height | 200 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) |
Accessories & related products
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized · Ø outside: 14 mm · Total length: 122 mm
3,00 EUR
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: raw · Total length: 122 mm · Ø outside: 14 mm · Ø inside: 9 mm
6,60 EUR
Solid galvanized main stand | Puch Maxi S
Manufacturer: Made in Switzerland · Color: Chrome · Material: Steel · Surface: chrome-plated · Stand base - center mount (A): 210 mm · Total width of stand base (B): 275 mm · Wide receptacle (C): 86 mm · Ø Receptacle (D): 10 mm · Spring nipple distance - center pivot axis (E): 115 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 70 mm · Total height: 220 mm
110,50 EUR
swiing® revival screw set mounting stand Inox | Puch
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Surface: raw · Color: silver · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 17.5 mm · Shank: Yes · Number of components: 12 pcs
7,70 EUR
Buzzetti main stand black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Color: black · Surface: powder-coated · Stand base - center mount (A): 200 mm · Total width of stand base (B): 230 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.1 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 45 mm · Total height: 215 mm · Puch spare part no.: 349.3.24.500.2
71,20 EUR
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Color: black · Surface: powder-coated · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Total height: 240 mm · Puch spare part no.: 321.2.24.001.2
71,20 EUR
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized · Ø outside: 14 mm · Total length: 122 mm
3,00 EUR
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
39,00 EUR
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Ø axle: 4 mm · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: Yes · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony Spare part no.: A4606 · Alternative version of the Pony Spare part no.: A4606A · Pony spare part no.: A4607 · BOSCH spare part no.: 1 217 013 025 · Sachs spare part no.: 0283 116 102 · Alternative version of Sachs spare part no.: 0983 106 000 · Alternative version of Sachs spare part no.: 2783 039 001 · BERU spare part no.: 0 340 100 710
22,10 EUR
Union pedals plastic standard
Manufacturer: Union · Material: Plastic · Material: Steel · Color: black · Surface: rubberized · Thread type: FG14.3 (9/16" 20G) · Total length: 129 mm · Drive: Hexagon socket · Drive: Outer edge · Width: 77 mm · Height: 29 mm · Width across flats SW: 15 mm · Reflectors: Yes
14,40 EUR
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: raw · Total length: 122 mm · Ø outside: 14 mm · Ø inside: 9 mm
6,60 EUR
GPO pedal cranks pair chrome | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 156 mm · Total length: 180 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Thread type: FG14.3 (9/16" 20G) · Wide intake: 28 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
83,70 EUR
Collection only possible with online purchase and appointment.
