Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.
The set consists of 3 springs and 3 washers.
The clutches engage at approx. 5000 - 7000 rpm, depending on the oil, etc.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.
The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.
You can find other spring strengths in our range.
Details
| Spring design | Pressure spring |
| Manufacturer | MBR |
| Material | Spring steel |
| Color | white |
| Number of components | 6 pcs |
| Area of application | Racing |
Suitable for the following models
| Puch | E50 |
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM number: 0263 014 002
11,50 EUR
25,56 EUR/l
Air filter 2 PS (DGM) original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Plastic · Color: black · Mounting type: Plug connection clamped · Filter type: Grille · Width: 94 mm · Ø outside: 51 mm · Total length: 26.5 mm · Ø Internal connection: 49.7 mm · Height: 89 mm · Area of application: Original · Area of application: Tuning
18,50 EUR
Mazzucchelli crankshaft "Racing" 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Dimension needle bearing: 12 / 15 x 14.7 mm (axe 12) · Manufacturer: Mazzucchelli · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Ø coupling pin / vario pin: 12 mm · Thread type: M8x1.25 (standard thread) · Connecting rod length center-center: 87 mm · Total length crankpin ignition side: 90 mm · Total length crankpin ignition side: 106 mm · Thread length: 16 mm · Ø crank webs: 69.7 mm · Ø piston pin (B): 12 mm · Area of application: Racing · Ø Connecting rod eye: 15 mm · Bearing seat right: 15 mm · Weight: 705 g · Ø Bearing seat (ignition side): 15 mm · Wide crank webs: 33 mm · Length 1st paragraph: 21 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 63.5 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm · Inlet control time: 139 ° · Control time before O.T: 81 ° · Control time according to O.T: 58 ° · Number of gears: 1 pcs
174,30 EUR
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
398,50 EUR
Collection only possible with online purchase and appointment.
