Practical tool for fitting the tension spring to the central or side stand of your moped, moped or small motorcycle.
The spring is attached to the top of the frame and retracted at the lower end using the mounting pin. The mounting tool with the recess is placed on the stem nipple from below.
By gently pressing down on the tool, the tensioned rod spring slides safely over the tool onto the rod nipple.
The clamping tool is equipped with a rubberized handle for optimum grip.
Total length: 210 mm
Ø outer: 9.5 mm
Handmade quality product from the manufacturer MLM.
Details
| Manufacturer | MLM |
| Total length | 210 mm |
| Ø outside | 9.5 mm |
| Area of application | Special tool |
Accessories & related products
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
3,00 EUR
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Chrome steel (stainless steel) · Surface: raw · Total length: 122 mm · Ø inside: 9 mm · Ø outside: 14 mm
6,60 EUR
SONAX multifunctional oil 400 ml
Manufacturer: SONAX · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health
12,20 EUR
Not in stock
30,50 EUR/l
Moped fans like you also bought:
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
37,90 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Total length: 185 mm · Width across flats SW: 19 mm
16,70 EUR
Cast wheel hub | Puch Maxi, X30 NG-2AH
Material: Cast aluminum · Surface: blank · Surface: raw · Ø drum: 80 mm · Thread type: FG34.8 (1.37" 24G) · Ø inside: 27.9 mm · Ø bolt circle: 105 mm · Ø outside: 114.7 mm · Ø mounting hole: 6.1 mm · Ø axle: 12 mm · Thread length: 12 mm · Total length: 105 mm · Number of fixing points: 12 pcs · Color: silver · Area of application: Tuning
100,50 EUR
Not in stock
Collection only possible with online purchase and appointment.
