Shaft seal ring 17x40x7 mm for use on your moped with E50 engine.
This radial shaft seal ring is required three times per engine.
Ø inner: 17 mm
Ø outer: 40 mm
Width: 7 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - With rubberized outer casing, a sealing lip and a dust lip.
Original Puch spare part number: 901.3801
Details
| Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Width | 7 mm |
| Manufacturer | Puch |
| Temperature resistance (min.) | -30 - 100 °C |
| Ø inside | 17 mm |
| Material | NBR |
| Surface | rubberized |
| Ø outside | 40 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,50 EUR
2.450,00 EUR/l
Oil seal FPM 17/40/7 DUO VITON | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Manufacturer: Puch · Material: FPM - Rubber · Area of application: Standard · Surface: rubberized · Width: 7 mm · Ø outside: 40 mm · Temperature resistance (min.): -30 - 200 °C
11,10 EUR
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -45 - 200 °C · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Oil seal NBR 22/40/7 AS crankshaft | E50
Temperature resistance (min.): -30 - 100 °C · Width: 7 mm · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 22 mm · Ø outside: 40 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft
5,45 EUR
NTN 6203 Ball bearing 17/40/12
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 17 mm · Stock number: 6203 · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø outside: 40 mm · Ball bearing closed: No
7,25 EUR
Oil seal NBR 22/40/7 A DUO crankshaft | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 22 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Width: 7 mm · Ø outside: 40 mm · Temperature resistance (min.): -30 - 100 °C
6,60 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch spare part no.: 900.1216 · Puch spare part no.: 901.1308
11,10 EUR
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Ø inside: 106 mm · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
3,25 EUR
Collection only possible with online purchase and appointment.
