Silver bayonet fastener for universal use on your moped, moped and small motorcycle.
The quick-lock fastener is used in the cross sector, for example, to quickly remove fairing parts.
The quick-release fastener has a wire handle for easy operation by hand. Should this break off in the event of a fall, there is also a slot in the screw head.
The anchor plate is made of galvanized steel and can be attached to various covers and metal sheets.
Contents:
- Anchor clip
- Locking pin
- Shim washer
Clamping range: 4 - 8 mm
Ø bolt: 6.8 mm
Turning range: 1/4 turn
Alternative fastening clips and side protection screws can be found in the accessories section.
Details
| Material | Steel, Chrome steel (stainless steel) |
| Surface | galvanized (blue), raw |
| Color | silver |
| Width | 24.5 mm |
| Height | 38 mm |
| Total length | 25.7 mm |
| Number of fixing points | 1 pcs |
| Ø mounting hole | 6.8 mm |
Accessories & related products
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Manufacturer: Pony · Material: Hard plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: black · Color: silver · Drive: External hexagon · Drive: Slot · Total length: 29.5 mm · Thread type: Sheet metal screw · Ø External head: 19 mm · Number of components: 1 pcs · Area of application: Standard · Thread length: 18 mm
2,80 EUR
Clip chain guard/ footboard | Pony GTX Cilo 521
Manufacturer: Pony · Material: Spring steel · Surface: galvanized (blue) · Color: silver · Width: 16.1 mm · Height: 6.7 mm · Total length: 23.9 mm · Thread type: Sheet metal screw · Number of fixing points: 1 pcs · Ø mounting hole: 3 mm · Ø mounting hole: 3.9 mm
1,65 EUR
Moped fans like you also bought:
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Ø outside: 61 mm · Filter type: Grille · Length rubber part: 63.5 mm · Total length: 113 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No
15,20 EUR
Magura set screw M6x34 mm lock nut SW8
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats Screw: 8 mm · Ø cable holder: 3.05 mm · Slotted: No · Thread type: M6x1 (standard thread) · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm · Thread length: 24 mm · Total length: 34 mm
2,90 EUR
Union pedals plastic standard
Manufacturer: Union · Material: Plastic · Material: Steel · Surface: rubberized · Color: black · Width: 77 mm · Height: 29 mm · Drive: Hexagon socket · Drive: Outer edge · Total length: 129 mm · Thread type: FG14.3 (9/16" 20G) · Width across flats SW: 15 mm · Reflectors: Yes
15,10 EUR
GPO sprocket 36 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 36 pcs · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Ø bolt circle: 106 mm · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm
23,30 EUR
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Manufacturer: Pony · Material: Hard plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: black · Color: silver · Drive: External hexagon · Drive: Slot · Total length: 29.5 mm · Thread type: Sheet metal screw · Ø External head: 19 mm · Number of components: 1 pcs · Area of application: Standard · Thread length: 18 mm
2,80 EUR
Clip chain guard/ footboard | Pony GTX Cilo 521
Manufacturer: Pony · Material: Spring steel · Surface: galvanized (blue) · Color: silver · Width: 16.1 mm · Height: 6.7 mm · Total length: 23.9 mm · Thread type: Sheet metal screw · Number of fixing points: 1 pcs · Ø mounting hole: 3 mm · Ø mounting hole: 3.9 mm
1,65 EUR
Collection only possible with online purchase and appointment.
