Rear wheel hub for spoke rims of Puch Maxi S / N and Puch X30 Sport NG-2A mopeds / mopeds.
The bearings with M12 wheel axle are already installed and still lubricated with old grease from back then. We recommend disassembling, cleaning and relubricating the hub before use.
These ultra-rare hubs are from old stock and show some corrosion and scratches. However, they are the perfect base for polishing or painting.
Corresponding add-on parts such as wheel nuts, freewheel, brake anchor plate, brake pads etc. can be found in the accessories section.
NOS – New from old stock.
Original Puch spare part number: 349.5.41.803.1
Details
| Manufacturer | Puch |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Height: 10 mm · Thread depth: 10 mm · Area of application: Standard · Strength class: 8 · Width across flats SW: 19 mm
2,30 EUR
Nut M12x1 x 5 SW19 Wheel nut galvanized
Drive: External hexagon · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Height: 5.8 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
2,10 EUR
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Diameter: 29 mm · Ø inside: 12 mm · Ø outside: 29 mm · Total length: 190 mm · Thread length: 29 mm · Thread length: 53 mm · Width across flats SW: 19 mm · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes
45,00 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Total length: 135 mm · Ø screw holder: 6.5 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
86,60 EUR
ESJOT freewheel 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Thread type: FG34.8 (1.37" 24G) · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Thickness: 15 mm
17,20 EUR
swiing® revival wheel bearing set M12x1 Ø 29 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF12x1 (fine pitch thread) · Ø outside: 19.9 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 3/16" (4.78 mm)
51,20 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Thread length: 4 mm · Screw head: Lens head · Number of components: 2 pcs
2,30 EUR
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Height: 10 mm · Thread depth: 10 mm · Area of application: Standard · Strength class: 8 · Width across flats SW: 19 mm
2,30 EUR
Nut M12x1 x 5 SW19 Wheel nut galvanized
Drive: External hexagon · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Height: 5.8 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
2,10 EUR
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Surface: raw · Color: silver · Quantity: 36 pcs · Length from hook: 188 mm · Thread length: 11 mm · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
63,50 EUR
GPO pedal cranks chrome (pair) | Puch
Total length: 180 mm · Manufacturer: GPO · Wide intake: 28 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
86,60 EUR
Collection only possible with online purchase and appointment.
