Special saddle in a low design and deep sissy bar for your moped, moped and small motorcycle.
Chopper seat with Puch print. The moped seat is not sprung. The saddle holder is in the front part, so the seat slides far back.
The raised upholstery and the attached backrest ensure a very comfortable seat.
Width: 25 cm
Length: 30 cm
Height (upholstery): approx. 6 cm
Total height of upholstery: 18 cm
Total height with backrest: 28 cm
Figure 5 serves only to illustrate the assembled saddle.
Alternative saddles and other attachments can be found in the accessories section.
A quality product made in Portugal.
Details
Manufacturer | Made in Portugal |
Color | black |
Lettering | Yes |
Height | 280 mm |
Total length | 300 mm |
Width | 250 mm |
Suitable for the following models
Puch |
Accessories & related products
Denfeld saddle black NOS
Manufacturer: Denfeld · Ø Saddle tube holder: 22 mm · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Spring-loaded: Yes · Lettering: No · Total length: 280 mm · Width: 280 mm · Height: 20 mm · Height: 120 mm · Material thickness: 2 mm · Material thickness: 4 mm · Number of fixing points: 1 pcs
343,40 EUR
Saddle suspension low version black
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Color: black · Surface: powder-coated · Spring-loaded: Yes · Lettering: No · Total length: 300 mm · Number of fixing points: 1 pcs · Width: 90 mm · Width: 245 mm · Height: 165 mm
57,10 EUR
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool
11,30 EUR
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 82 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Standard · Area of application: Tuning
152,20 EUR
GPO piston stopper M14x1.25
Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 83 mm · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm
10,90 EUR
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 100 mm · Thread type: MF12x1 (fine pitch thread)
13,40 EUR