Classic vintage saddle made of black plastic in vintage style for your bike, moped, moped and small motorcycle.
The seat surface is very comfortable due to the tension springs under the seat cover and thus adapts perfectly to your rear end.
The base is painted silver and the springs are galvanized. The barrel spring under the base absorbs the biggest impacts and transforms them into a pleasant rocking motion.
The cover must be riveted to the frame at the front and rear ends of the saddle cover. The necessary fastening holes in the saddle cover are not yet present and must be positioned by you; we recommend starting at the back outside and then marking the front holes, at the end the metal plates can be bent around the frame.
The corresponding rivets are included.
Super saddle for classic car conversions and restoration of your vintage gem.
Saddle tube mount: 22 mm
Length: 235 mm
Width: 247 mm
Total height: 140 mm
Height center of saddle mounting bolt - seat surface: 100 mm
You can find suitable aids and alternative saddles (if this is too complex for you) as well as matching saddle rails in the accessories section.
Details
| Width | 247 mm |
| Height | 140 mm |
| Ø Saddle tube holder | 22 mm |
| Material | Plastic |
| Color | black |
| Spring-loaded | Yes |
| Lettering | No |
| Total length | 235 mm |
Accessories & related products
Saddle Comfort Raute barrel springs black
Manufacturer: Made in Italy · Ø Saddle tube holder: 22 mm · Material: Imitation leather · Material: Steel · Color: black · Surface: blue galvanized · Spring-loaded: Yes · Total length: 240 mm · Lettering: No · Width: 220 mm · Height: 70 mm · Height: 110 mm · Number of fixing points: 1 pcs
54,00 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
11,10 EUR
24,67 EUR/l
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -45 - 200 °C · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Hot 
Leonelli 12V voltage regulator (1A quality)
Width: 27 mm · Height: 15 mm · Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws · Total length: 50 mm
39,00 EUR
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Material: Steel · Ø Internal flywheel: 90 mm · Cable available: Yes · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.5 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Alternative version of the Pony Spare part no.: A4606 · BOSCH spare part no.: 1 217 013 025 · Alternative version of Sachs spare part no.: 0983 106 000 · BERU spare part no.: 0 340 100 710
16,70 EUR
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Ø piston pin (B): 12 mm · Weight: 79 g · Pony spare part no.: A2772 · Pony spare part no.: A4358 · Sachs spare part no.: 0286 377 010 · Sachs spare part no.: 0286 378 005
55,80 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Surface: blank · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
27,80 EUR
Collection only possible with online purchase and appointment.
