This faithful reproduction of the 17 mm Bing SSB carburetor is an absolute must if you want to squeeze the last horsepower out of your Sachs moped, moped and small motorcycle of the 502, 50/2, 50/3, 50/4 series.
These engines were installed on the following models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
The rectangular intake flange with 13 x 17 mm Öffnung corresponds to an area of a round 17 mm tuning carburetor.
Installed nozzle size: 76
The long air filter cap is installed. If the carburetor is installed on a diaphragm cylinder or 4-speed engine, the short air filter cap should be used.
Suitable add-on parts such as cylinders, air filters, nozzle sets, adjusting nozzles etc. can be found in the accessories section.
In conjunction with the cylinder kit 28748, be sure to order the gasket 21571 as well.
Made by the quality brand swiing – swiss ingenious.
Details
| Manufacturer | swiing |
| Camouflaged | No |
| Material | Aluminum |
| Width | 85 mm |
| Carburetor type | SSB |
| Height | 100 mm |
| Nominal diameter | 17 mm |
| Mounting type | Flange |
| Ø fuel hose connection | 6 mm |
| Total length | 132 mm |
| Area of application | Standard, Tuning |
| Mixed oil connection | No |
| Vacuum connection | No |
| Choke control | without choke |
| Nozzle size | 76 |
| Hole spacing inlet | 31 mm |
Suitable for the following models
| Sachs | 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
swiing nozzle set (58 - 68) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SSB · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats SW: 8 mm · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
42,40 EUR
swiing nozzle set (70 - 80) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SSB · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats SW: 8 mm · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80
42,40 EUR
swiing 38 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 38 mm · Manufacturer: swiing · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 · Camouflaged: No · Area of application: Racing
245,80 EUR
swiing® ingenious 41 mm cylinder kit Racing (Version 2.0) fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
245,80 EUR
swiing 38 mm cylinder kit Racing fan-cooled | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 38 mm · Manufacturer: swiing · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
245,80 EUR
swiing 41 mm cylinder kit Racing fan-cooled (Version 2.0) | Sachs 50/2, 50/3, 50/4 (DE)
Manufacturer: swiing · Material: Aluminum · Camouflaged: No · Area of application: Racing · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Nominal diameter: 41 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Hole spacing inlet: 31 mm
245,80 EUR
Moped fans like you also bought:
Hot 
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Area of application: Tuning · Surface: anodized · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Number of flaps: 2 pcs · Total length: 29 mm · Thickness: 6.9 mm · Width: 80 mm · Mounting type: Screws · Ø inside: 17 mm · Number of fixing points: 4 pcs · Hole spacing: 31 mm · Hole spacing: 67 mm
55,80 EUR
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight: 86 g
44,60 EUR
Collection only possible with online purchase and appointment.
