Slotted 41 mm racing cylinder made of aluminum for Swiss Sachs 50/2 (502) engines, which were installed on the following moped / moped models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
Version 2.0:
The tuned aluminum cylinder has been extensively tested and further developed over the last few years and is now available with even more torque.
With larger displacement, optimized timing, larger intake and exhaust as well as enlarged overflow channels, your oldie becomes a high-flyer.
The tuned aluminum racing kit was developed and tested for years in Switzerland and is now finally available in version 2.0.
The new version delivers even more torque than the predecessor, without compromising in the mid and upper rev range.
The cylinder head, which can only be used for tuning cylinders in this series, is equipped with a raceway centering system. This ensures that the combustion chamber is perfectly aligned and the piston is not at TDC.
These attributes characterize the cylinder kit:mer
Scope of delivery:
We recommend taking the following precautions:
All items mentioned are listed under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 / 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Cast aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 95 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø screw holder: 6.7 mm · Candle thread: short · Decompressor: M10x1.5 · Total length: 126.6 mm · Width: 95 mm · Height: 44.8 mm · Area of application: Tuning
Details
Nominal diameter | 41 mm |
Manufacturer | swiing® ingenious parts |
Material | Cast aluminum |
Camouflaged | No |
Area of application | Racing |
Surface | sandblasted |
Displacement | 55 ccm |
Crankshaft stroke | 42 mm |
Ø piston pin (B) | 12 mm |
Ø cylinder neck | 45 mm |
Hole spacing inlet | 31 mm |
Ø outlet inside | 20.5 mm |
Ø Inlet inside | 15.3 mm |
Thread inlet | M6x1 (standard thread) |
Outlet type | Union nut |
Thread outlet | M35x2 (standard thread) |
Number of fixing points | 4 pcs |
Hole pattern [mm] | 60 x 40 / 37 x 37 |
Suitable for the following models
Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) |
Accessories & related products
Dell'Orto 16/16 SHA carburetor hand choke
Color: black · Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: No · Carburetor type: SHA (type 4) · Nominal diameter: 16 mm · Nozzle thread: M5 · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Area of application: Tuning · Width: 72 mm · Vacuum connection: No · Height: 111 mm · Choke control: Hand choke
78,10 EUR
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
24,50 EUR
2.450,00 EUR/l
swiing set exhaust resonance Ø 28 / 70 mm | Sachs 50/2
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Union nut
167,60 EUR
swiing carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing · Camouflaged: No · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 17 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 76 · Mounting type: Flange · Hole spacing inlet: 31 mm · Total length: 132 mm · Width: 85 mm · Height: 100 mm · Area of application: Standard · Area of application: Tuning
143,40 EUR
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Height: 85 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Mounting type: Flange · Hole spacing inlet: 31 mm · Nozzle size: 75 · Total length: 132 mm · Width: 87 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke
143,40 EUR
swiing set stud bolts M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Diameter: 6 mm · Drive: External hexagon · Width across flats SW: 8 mm · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
21,50 EUR
swiing® ingenious piston 41 mm | Sachs 50/2
Manufacturer: swiing® ingenious parts · Nominal diameter: 41 mm · Ø outside piston (A): 40.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm
65,50 EUR
swiing® ingenious 16 mm intake manifold Dell'Orto SHA | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs · Area of application: Tuning
54,50 EUR
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Ø outside: 35 mm · Ø inside: 15 mm · Area of application: Standard · Width: 8 mm · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
27,80 EUR
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Nominal diameter: 17 mm · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Mounting type: Stud bolts & nuts · Width: 86 mm · Height: 99 mm · Hole spacing inlet: 31 mm · Total length: 116 mm · Nozzle thread: M7x0.75 · Nozzle size: 76 · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: without choke · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
89,30 EUR
100,50 EUR
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Ø inside: 8.5 mm · Ø outside: 19.3 mm · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Waistband height: 1.5 mm · Manufacturer: swiing® revival parts · Material: Rubber · Area of application: Standard · Material: Steel · Color: black · Surface: raw · Total length: 19 mm · Pony spare part no.: A1940 · Sachs spare part no.: 0260 101 000
7,70 EUR
Not in stock
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Hole spacing inlet: 31 mm · Ø outlet inside: 28 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40 · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
44,60 EUR
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Height: 85 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Mounting type: Flange · Hole spacing inlet: 31 mm · Nozzle size: 75 · Total length: 132 mm · Width: 87 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke
143,40 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Width: 8 mm · Area of application: High End · Area of application: Standard · Ø inside: 15 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
55,80 EUR