Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Area of application | Motor bracket |
| Surface | galvanized (blue) |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Area of application: Motor bracket · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Total length: 370 mm · Color: red · Color: white · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm
87,00 EUR
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Number of components: 1 pcs
11,50 EUR
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs
51,00 EUR
Not in stock
GPO clutch trigger Sachs 502 / 503 (M27x1.25 / M20x1)
Width across flats (trigger): 27 mm · Manufacturer: GPO · Width across flats Screw: 19 mm · Material: Steel · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Surface: blackened · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
23,10 EUR
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø outside: 75 mm · Ø inside: 64 mm · Thread length: 40 mm · Height: 16 mm · Area of application: Special tool · Number of components: 4 pcs · Sachs OEM number: 0276 057 000
34,80 EUR
swiing® revival puller clutch basket manual | Sachs
Manufacturer: swiing® revival parts · Width across flats Screw: 19 mm · Material: Steel · Thread type: MF12x1.25 (fine pitch thread) · Surface: blackened · Surface: galvanized (blue) · Total length: 106 mm · Thickness: 25 mm · Area of application: (Dis)assembly tool · Number of components: 4 pcs
38,20 EUR
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm
23,10 EUR
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Ø Pin: 8 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Ø outside: 93 mm · Ø inside: 27 mm · Total length: 290 mm · Thickness: 5 mm · Height: 80 mm · Area of application: Special tool · Number of components: 1 pcs
55,70 EUR
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Area of application: Motor bracket · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Total length: 370 mm · Color: red · Color: white · Width: 245 mm · Height: 340 mm · Hole spacing: 21.5 mm · Material thickness: 3.5 mm
87,00 EUR
Collection only possible with online purchase and appointment.
