Camouflaged 17 mm tuning intake bend suitable for Puch Maxi mopeds / mopeds which have an E50 engine installed.
The intake bend has been specially developed for use with the swiing ingenious 17 mm SRF carburetor with Ø 23 mm connection. In addition, the Puch logo and the 12 have been cast into the outside for optimum camouflage like the original.
With this combination, you get the full potential out of your engine and are still perfectly camouflaged from the outside.
Ø inside: 17 mm
Ø connection: 23 mm
Height (flange - center bore): 42 mm
Total height: 53.5 mm
Hole spacing: 38 mm
To ensure that the air filter fits perfectly on the frame, it is imperative that the 3 mm inlet gasket is used.
You can find the right carburetor, air filter, gasket and a complete set for your Maxi in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Ø inside | 17 mm |
| Ø External connection | 23 mm |
| Mounting type | Stud bolts & nuts |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning, Racing, Performance |
| Number of fixing points | 2 pcs |
| Total height | 53.5 mm |
| Height flange center hole | 42 mm |
| Total length | 38 mm |
| Camouflaged | Yes |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Clamping screw torque (max.): 4 N/m
121,60 EUR
swiing® revival nozzle M3.5 (41 - 120 of your choice) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle thread: M3.5x0.6 (standard thread)
4,50 EUR
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Material: Plastic · Color: black · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Mounting type: Plug connection clamped · Ø Internal connection: 28 mm · Camouflaged: Yes · Area of application: Standard · Area of application: Tuning
28,90 EUR
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
139,00 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 64.8 mm · Height: 89 mm · Height: 110 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m
139,00 EUR
Moped fans like you also bought:
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle thread: M3.5x0.6 (standard thread)
18,40 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
139,00 EUR
Collection only possible with online purchase and appointment.
