Ready-to-install cable starter for all Piaggio Ciao moped / moped models with mono and variomatic drive.
The Swiss-made pull starter is designed for the highest loads and has proven itself in racing.
Assembly:
1. Starter pinion: Clean the mounting surfaces, then screw the counterpart for the pull starter onto the clutch or Variomat (secure the enclosed flange nut with Loctite).
2. Pull starter: Lightly fasten the housing adapter using the engine screws. Then fit the round housing with the pull-wire starter unit and secure with the enclosed M5 x 45 mm screws. Finally, tighten the engine screws.
Application:
1. Before starting, pull the cable slowly a few times so that the engine turns over empty (must be done before each start attempt).
2. Pull out the cable starter handle until it engages fully and meets with resistance. Then pull through in one go.
Tip: Wear gloves! Hold the handle firmly.
Note: The pedal mechanism can no longer be operated as the pedal arms would come into contact with the housing of the pull starter. Therefore, footrests or a pedal axle extension must be fitted.
Further helpful parts for the cable starter conversion such as Loctite, racing gloves, replacement cord etc. can be found in the accessories section. You can find them in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® ingenious parts · Material: Steel, Aluminum, Plastic · Surface: anodized · Color: black, silver · Ø outside: 115 mm · Number of fixing points: 3 pcs · Hole spacing: 75 mm, 78 mm · Height: 103 mm · Total length: 160 mm · Width: 135 mm
Details
Total length | 160 mm |
Manufacturer | swiing® ingenious parts |
Material | Steel, Aluminum, Plastic |
Surface | anodized |
Color | black |
Ø outside | 115 mm |
Hole spacing | 75 mm, 78 mm |
Width | 135 mm |
Number of fixing points | 3 pcs |
Height | 103 mm |
Suitable for the following models
Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
25,10 EUR
2.510,00 EUR/l
Screw M5x45 cylinder head Allen key galvanized
Material: Steel · Surface: galvanized (blue) · Total length: 50 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 8.5 mm · Thread type: M5x0.8 (standard thread) · Shank: Yes · Shank length: 23 mm · Thread length: 22 mm · Strength class: 8.8
2,30 EUR
swiing® ingenious cable starter red | Piaggio Ciao
Ø outside: 115 mm · Width: 135 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Plastic · Material: Steel · Surface: anodized · Color: black · Color: red · Total length: 160 mm · Height: 103 mm · Hole spacing: 75 mm · Hole spacing: 78 mm · Number of fixing points: 3 pcs
223,20 EUR
Moped fans like you also bought: