Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Material | Steel |
Surface | blue galvanized |
Height | 28.2 mm |
Width across flats SW | 6 mm, 9 mm |
Thread type | M6x1 (standard thread) |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) |
Accessories & related products
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Area of application: Standard · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Total length: 32 mm · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread length: 13 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Number of components: 3 pcs
14,40 EUR
swiing® revival rear brake anchor plate | Puch Maxi S
Manufacturer: swiing® revival parts · Total length: 187 mm · Material: Steel · Surface: blue galvanized · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
78,10 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Ø outside: 92 mm · Manufacturer: swiing® revival parts · Ø axle: 12 mm · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Total length: 135 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm · Ø screw holder: 6.5 mm
83,70 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (stainless steel) · Width: 105 mm · Thread length: 8 mm · Color: silver · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs · Height: 5.3 mm
12,20 EUR
Magura cable clamp Ø 8 x 15 mm
Thread type: M6x1 (standard thread) · Manufacturer: Magura · Total length: 15 mm · Area of application: Standard · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Thread length: 7 mm · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Ø Bundle: 6 mm
2,80 EUR
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Height: 26 mm · Height: 60 mm · Height: 65 mm · Width: 123 mm · Width: 230 mm · Width: 330 mm · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank)
10,50 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,10 EUR