For: Puch

23403

swiing® revival crankshaft standard (version 2.0) | Puch Sport X30 NS, NL / Maxi S2

145,20 EUR

Incl. VAT, plus shipping costs

in stock

The item is in stock. Delivery time 2–4 workdays

Original crankshaft suitable for manual Puch X30 Sport NS & NL and Puch Maxi S2 mopeds / mopeds with windage-cooled Z50 engines (not suitable for windage-cooled Puch X30 Velux engines).

High-quality and precisely fitting crankshaft, which has proven itself in various load tests.
The standard shaft was designed for use in original engines.

Dimensions of the crankshaft:

  • Total length of the clutch-side crankpin: 57 mm
  • Total length of the crank pin on the ignition side: 66 mm
  • Length 1st shoulder (clutch side): 20 mm
  • Length 2nd shoulder (clutch side) 19 mm
  • Ø 1st heel (clutch side): 17 mm
  • Ø 2nd paragraph (coupling side): 15 mm
  • Thread (on the coupling side): MF10x1 mm
  • Length of shoulder (on the coupling side): 26.3 mm
  • Ø heel (on the end face): 17 mm
  • Thread (on the end face): MF10x1 mm
  • Ø crank webs: 69.9 mm
  • Width of crank webs: 34 mm
  • Ø connecting rod eye at top: 15 mm
  • Ø connecting rod pin at the bottom: 16 mm
  • Connecting rod length (center-to-center): 90 mm
  • Stroke: 43 mm
  • Weight (incl. connecting rod): 892 grams
  • Dimension needle bearing: Ø 12 / 15 x 14.2 mm (axe 12)

Revised version of the previously offered crankshaft with improved balance ratio and therefore smoother running characteristics.

The needle bearing is included in the scope of delivery.
You can find the matching bearings and oil seals in the accessories section.

Nostalgic product for the highest demands of the quality brand swiing®.

Original Puch spare part number: 349.1.10.215.0

Details

Manufacturerswiing® revival parts
MaterialSteel
Cheek typestandard
Crankshaft stroke43 mm
Connecting rod length center-center90 mm
Total length of crankpin on clutch side57 mm
Total length crankpin ignition side66 mm
Ø crank webs69.9 mm
Ø piston pin (B)12 mm
Ø Connecting rod eye15 mm
Thread typeMF10x1 (fine pitch thread)
Ø Bearing seat (clutch side)17 mm
Ø Bearing seat (ignition side)17 mm
Thread length7 mm, 13 mm
Dimension needle bearing12 / 15 x 14.2 mm (axe 12)
Area of applicationStandard
Wide crank webs34 mm
Length 1st paragraph20 mm
Length 2nd paragraph19 mm
Ø 1st step (on the coupling side)17 mm
Ø 2nd shoulder (on the clutch side)15 mm
Length of shoulder (ignition side)26.3 mm
Weight892 g
Number of gears2 pcs

Suitable for the following models

Puch

Z50 (X30 Sport)

Accessories & related products

Moped fans like you also bought: