Choke lever for attachment to the throttle twist grip on your moped, moped or small motorcycle.
The decompression grip with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Material | Sheet metal (steel), Plastic |
Surface | blue galvanized, raw |
Color | gray, silver |
Place of use | right |
Height | 20 mm |
Total length | 50 mm |
Suitable for the following models
Universal | |
Puch | |
Sachs | |
Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
2,25 EUR
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Surface: burnished · Thread type: M5x0.8 (standard thread) · Material lever: Plastic · Color: black · Ø inside: 22 mm · Mounting type: Screws · Total length: 94 mm · Number of fixing points: 2 pcs
55,80 EUR
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 1800 mm · Area of application: Standard · Pony spare part no.: P0919
2,70 EUR
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Total length: 15 mm · Thread length: 7 mm · Area of application: Standard
2,80 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
3,15 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
2,25 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
11,10 EUR
24,67 EUR/l
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Color: sand-colored · Thickness: 0.35 mm · Width: 130 mm · Total length: 200 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
6,05 EUR