Dust ring suitable for all rear sprockets, which were installed on Sachs 50/2, Sachs 503, Puch X30 Sport NS / NL, Puch X30 Velux and Zündapp Belmondo mopeds / mopeds, among others.
The stainless steel ring (chrome steel) is installed on the side of the driver in the hub shell.
Since the fit of used rear sprockets is often uneven, we recommend gluing the dust cover in place with Loctite adhesive. You can find this in the accessories.
- Ø inside: 46 mm
- Ø outside: 55 mm
- Thickness: 4.5 mm
Note: This dust cover only fits 2nd and 3rd generation Rücktrittnubs. Generation (which not only have a slot for the spokes, but also a hole in the middle).
You can find more parts for your caster in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (stainless steel) |
| Ø inside | 46 mm |
| Thickness | 4.5 mm |
| Ø outside | 55 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Area of application: Standard
8,85 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
26,70 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Ø shaft: 10.5 mm · Thread length: 34 mm · Thread length: 45 mm · Shank length: 95.6 mm
33,40 EUR
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
24,50 EUR
2.450,00 EUR/l
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread length: 12 mm · Number of components: 12 pcs
22,20 EUR
Moped fans like you also bought:
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Area of application: Standard
8,85 EUR
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 14 mm · Ø outside: 27 mm · Ball bearing closed: No
7,70 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Ø shaft: 10.5 mm · Thread length: 34 mm · Thread length: 45 mm · Shank length: 95.6 mm
33,40 EUR
Collection only possible with online purchase and appointment.
