Socket axle M11x180 made of galvanized steel for various rear wheels with cast-spoke hubs on your Puch Maxi & X30 automatic moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pcs M11 x 1 nuts (SW17 / 4 mm)
- 1 piece spacer sleeve (12.3/19x6 mm)
- 2 pieces of swiing bearing shells Ø 29 mm
- 2 pieces of dust rings 18.6 / 29.3 mm
- 22 pcs wheel bearing balls Ø 5.56 mm (7/32")
Version 2.0: Ø revised version of the previously offered wheel axle. The axle, as well as the cones & wheel bearing shells are made of high-quality material that can withstand high loads.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts · Ø outside: 29.3 mm · Ø inside: 18.6 mm · Puch spare part no.: 349.1.40.011.1
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Area of application: Standard · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Number of components: 22 pcs
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.95 mm · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 19 mm
Details
| Total length | 180 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | burnished, blue galvanized |
| Ø ball [inch] / [mm] | 7/32" (5.56 mm) |
| Width across flats SW | 19 mm, 15 mm, 17 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Thread length | 75 mm |
| Shank length | 30 mm |
| Ball bearing closed | No |
Suitable for the following models
| Puch |
Accessories & related products
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø inside: 12 mm · Ø shaft: 19 mm · Ø outside: 29 mm · Shank length: 100 mm · Ball bearing closed: Yes · Total length: 190 mm · Thread length: 29 mm · Thread length: 53 mm
43,50 EUR
swiing® revival nut M11x1 x 4 SW17 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 4 mm · Strength class: 8 · Width across flats SW: 17 mm
3,25 EUR
swiing® revival wheel axle set M11x1 x 180 with cones & nuts cast rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.95 mm · Width across flats SW: 19 mm · Thread length: 75 mm · Total length: 180 mm · Shank length: 30 mm
44,60 EUR
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Chain type: 415H · Color: black · Number of teeth: 45 pcs · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Ø inside: 94 mm · Hole spacing: 36.5 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
22,20 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
11,10 EUR
swiing® revival wheel axle set M11x1 x 180 with cones & nuts cast rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.95 mm · Width across flats SW: 19 mm · Thread length: 75 mm · Total length: 180 mm · Shank length: 30 mm
44,60 EUR
Collection only possible with online purchase and appointment.
