Socket axle M11x180 made of heavy-duty, galvanized special steel with cones and nuts for various rear wheels with cast spokes on your Puch moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces of swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pieces of M11 x 1 nuts (SW17 / 4 mm)
- 1 piece of spacer (12.3/19x6 mm)
&p;reworked version of the previously offered wheel axle. Both the axle and the cones are made of high-quality material that can withstand high loads.
The ends of the wheel axle are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Other axle parts can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
| Ø shaft | 10.95 mm |
| Total length | 180 mm |
| Width across flats SW | 19 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Thread length | 75 mm |
| Shank length | 30 mm |
Suitable for the following models
| Puch |
Accessories & related products
swiing® revival wheel axle M11x1 x 180 Set spoke rear wheel (Version 2.0) | Puch Maxi, X30
Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Shank length: 30 mm · Thread length: 75 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm
44,60 EUR
CIF wheel axle set M11x1 x 200 mm galvanized
Manufacturer: CIF · Ball bearing closed: No · Material: Steel · Surface: blue galvanized · Thread type: MF11x1 (fine pitch thread) · Height: 2 mm · Height: 4 mm · Height: 10 mm · Total length: 200 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø shaft: 10.3 mm · Shank length: 14.5 mm · Thread length: 92 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm
16,70 EUR
Bearing cone M11x1 mm
Height: 12 mm · Width across flats SW: 15 mm · Ø outside: 19 mm · Material: Steel · Surface: gas nitrided · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
8,85 EUR
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: polished · Nut type: Cap nut · Thread type: MF11x1 (fine pitch thread) · Height: 26.2 mm · Drive: External hexagon · Thread depth: 23.4 mm · Width across flats SW: 17 mm
13,30 EUR
swiing® revival set wheel bearing M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Ø inside: 25.85 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Diameter: 17.95 mm · Ø outside: 29 mm · Width across flats SW: 15 mm · Height: 10.6 mm · Height: 14.15 mm
49,50 EUR
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,10 EUR
24,67 EUR/l
Wheel axle set M12x1 x 165 mm front
Width: 7 mm · Height: 9.9 mm · Width: 10.2 mm · Width: 32 mm · Total length: 165 mm · Width across flats SW: 19 mm · Manufacturer: Quenching · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Shank length: 114 mm · Thread length: 25 mm · Thread length: 26 mm
16,40 EUR
swiing® revival wheel axle set M11x1 x 180 cast rear wheel (version 2.0) | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
55,80 EUR
Collection only possible with online purchase and appointment.
