Professional Addy E50 4-bearing racing engine case, spindled to ” 52 mm for your Puch moped / moped.
Thanks to the gouging, it is possible to fit large 47 mm cylinder kits such as those from Gilardoni Italkit, Airsal or Parmakit. The slightly larger cylinder mounting surface ensures that tuning cylinders still have sufficient sealing surface available.
The housing was specially designed and manufactured for the tuning sector, which is why some components such as the flat surface for mounting a kick starter have been omitted.
The case has the following special features:
- Enlarged sealing surfaces in the area of the cylinder base
- slightly outwardly offset housing screws, leaving more space for larger overflow ducts
- prepared milling surfaces for GME inlet systems
- Fitting pins for secure positioning when assembling the housings
- Additional threads for a more flexible edge assembly
- Extra-large cooling fins in the lower area for better temperature dissipation and thus reduced wear on the crankshaft bearings
- Pin holder, 3 pcs. M6 thread at the original spacing
- Approved in all SAM moped racing and moped cross categories
- Perforation pattern for cylinder studs: 44 x 44 mm
Installation tips:
- Using the shims supplied, various gearboxes with different positions, such as those of the 3-bearing or MBR gearboxes, can be cleanly spaced out. Before reassembly, make sure that the gear wheel is properly centered.
Details
| Manufacturer | ADDY |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Material: Aluminum · Manufacturer: Parmakit · Surface: sandblasted · Camouflaged: No · Area of application: Tuning · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51 mm · Inlet window: 30 x 18 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 27.5 mm · Hole spacing outlet: 46 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Hole spacing inlet: 46 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
447,00 EUR
Parmakit 47 mm cylinder kit without head | Puch
Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Hole spacing inlet: 46 mm
345,30 EUR
Airsal 47 mm cylinder kit angled exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm
189,90 EUR
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 43 mm · Ø cylinder neck: 51 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm
234,60 EUR
Moped fans like you also bought:
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Total length: 18 mm · Screw head: Hexagon · Thread length: 12 mm · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Puch spare part no.: 901.1053
3,90 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,10 EUR
24,67 EUR/l
swiing® ingenious intake manifold Gilardoni italkit Inox
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Total length: 80 mm · Ø External connection: 24 mm · Ø inside: 21 mm · Mounting type: Screws · Total height: 55 mm · Height flange center hole: 42.5 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 35 · Camouflaged: No
75,90 EUR
DMP 45 mm cylinder kit incl. diaphragm | Puch
Manufacturer: DMP · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 45 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
178,70 EUR
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Area of application: Tuning · Recording type: Interlocking · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø Receptacle: 31 mm · Ø inside: 15 mm · Ø inside: 17 mm · Height: 49 mm · Ø outside: 99.5 mm
206,70 EUR
Collection only possible with online purchase and appointment.
