Original ivory-colored plastic cable duct for your Piaggio Si moped / moped.
The cable cover is flawlessly finished and fits perfectly.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. The throttle, deco and rear brake cables as well as the wiring harness are pulled through the cable cover.
The cable routing has an opening for the horn.
Total length: 305 mm
Ø horn cut-out: 55 mm
Horn hole circle: 65 mm
A matching horn and screws for attaching the cable tray can be found in the accessories section.
Original Piaggio spare part number: 212333, 186138, 91800, 217709, 921300, 921363, 921352
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Material | Plastic |
| Color | ivory |
| Total length | 305 mm |
| Number of fixing points | 3 pcs |
| Piaggio OEM number | 212333, 186138, 91800, 217709, 921300, 921363, 921352 |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Quantity: 10 pcs · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
24,30 EUR
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
28,90 EUR
SITO Plus exhaust Ø 24 mm | Piaggio SI
Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Mounting type: Welded lug · Ø outside: 14 mm · Ø Internal connection: 22.3 mm · Ø Silencer: 70 mm · Total length: 720 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Flame tube attachment: Plug connection clamped
92,90 EUR
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Nominal diameter: 44 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
438,00 EUR
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Carburetor type: SHA (type 3) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Total length: 55 mm · Width: 60 mm · Height: 118 mm · Area of application: Tuning
88,20 EUR
Moped fans like you also bought:
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
23,10 EUR
swiing® revival 16" front fender primed | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Mounting type: Nuts & bolts · Folding the ends: open folded · Wheel size [inch]: 16 " · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Piaggio OEM number: 267651
40,60 EUR
Tail light black | Piaggio SI
Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Tension: 6 V · Tension: 12 V · Color: black · Color: red · Width: 100 mm · Bulb holder: Soffit pear · Height: 78 mm · Depth: 65 mm · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs
24,80 EUR
Collection only possible with online purchase and appointment.
